Overview
The Dana 44 replacement front outer axle shaft, part 41677, is a 19 spline outer stub for front Dana 44 axles with disc brakes. It fits 1980–1991 Chevrolet and GMC K-series trucks, Blazers, Jimmys and V-series models.
It is an alternative to aftermarket replacement shafts. The shaft is made from micro-alloy steel with a statistically controlled heat treatment that keeps hardness consistent. It takes a 5-760X U-joint, and the overall length is 9.94 inches.
Key features
- Front outer stub shaft with 19 splines
- For Dana 44 front axles with disc brakes
- 9.94 inch overall length
- Requires a 5-760X axle U-joint
- Micro-alloy steel, which Dana Spicer says improves strength
- Statistically controlled heat treatment for consistent hardness
Axle shaft and U-joint service
An outer stub takes the drive torque from the axle to the hub, so its splines and U-joint see steady wear. Once the shaft is out, the inner seal, the spline ends and the joint all deserve a look, because a worn component will load a new shaft unevenly and shorten its life.
When fitting an outer shaft, make sure the spline count and joint size match the axle. Keep the joint lubricated and check for play at the stub. Small clicks on turns, grease at the hub or a shaft that wobbles usually point to a part that needs attention.
- Check the splines for wear or twisting
- Inspect the U-joint for play
- Look for grease leaks at the hub seal
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 41677 |
| Axle type | Dana 44 |
| Axle location | Front |
| Shaft location | Outer stub |
| Brakes | Disc |
| Spline count | 19 splines |
| Overall length | 9.94 inches |
| U-joint | 5-760X axle U-joint, required |
| Material | Micro-alloy steel |
| Heat treatment | Statistically controlled |
Vehicle fitment
It fits 1980–1986 Chevrolet K10, K20 and K5 Blazer models, 1987–1991 Chevrolet Blazer and V-series trucks, 1980–1991 GMC Jimmy and K-series trucks, and the Suburban versions of those trucks, across their trims.
Ford, Dodge and Ram models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm that your front axle has disc brakes and that it takes a 5-760X U-joint before ordering, since the shaft is designed for that joint size.
What’s included
One front outer axle shaft.
Not included: U-joint.








