Overview
Dana Spicer part 76815-1X is a passenger side inner front axle shaft for the Dana 44. It is an OE-style replacement, and Dana Spicer describes its shafts as the same type that came in vehicles from the factory.
No vehicle is named for this shaft. Its 30 spline count and Dana 44 axle type are the main points to check against your front axle.
Key features
- Passenger side inner position
- 30 spline
- Dana 44 front axle
- OE-style replacement from Dana Spicer
Inspecting axle shafts
An inner axle shaft transfers torque from the differential to the wheel hub, and its splines must mesh cleanly with the side gear. Wear on splines often shows as a clunk when shifting between drive and coast, or as vibration under acceleration. Inspect the shaft for twisting, cracks at the flange and damaged splines before reinstalling it. A bent or worn shaft can also damage the seal and bearing in the housing.
When an axle shaft is pulled, the seal and bearing on that side are often replaced at the same time, since removal exposes them to damage. Clean the spline area, check the axle tube for leaks and confirm the hub is seated correctly before torquing the hub bolts.
- Check the splines for twisting or uneven wear
- Replace the seal when the shaft is removed
- Torque hub and retaining hardware to your vehicle’s specified values
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 76815-1X |
| Axle type | Dana 44 |
| Axle location | Front |
| Shaft location | Passenger side inner |
| Axle spline | 30 |
| Manufacturer | Dana |
Vehicle fitment
Match the Dana 44 axle type, the passenger side inner position and the 30 spline count to your front axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One passenger side inner axle shaft.










