Overview
The Currie CE-9120FJK is an adjustable front trac bar, part number CE-9120FJK, for the 2007-2014 Jeep Wrangler (JK). It has precise bends for a close fit into the JK and can be used on a stock JK, on a JK with Currie’s Off Road Suspension System, or anywhere in between.
The bar is made from 1.25 inch outside diameter by .250 inch wall 4130 chrome moly steel tubing, with greaseable high performance narrow Johnny Joint rod ends on both ends. The adjustable rod end uses a 1 inch right-hand thread and includes a jam nut. The arm is finished in semi-gloss black powder coat, and the forged Johnny Joint end has gold zinc plating.
Key features
- Greaseable narrow Johnny Joint rod ends on both ends
- Adjustable length with a 1 inch right-hand thread and jam nut
- Rubber limiting washers at the frame end to help keep the arm vertical
- 4130 chrome moly tubing with semi-gloss black powder coat
- Gold zinc plated forged Johnny Joint end
Greasing and maintaining joints
Johnny Joint rod ends allow the trac bar to move through the arc of suspension travel, so they are the parts that wear first. Greaseable designs can be maintained with a grease gun, which helps push out dirt and water that work into the joint. Regular inspection is simpler than waiting for a noise to develop.
Rubber limiting washers at the frame end help keep the arm vertical, and they can compress or crack over time. Replace them when they lose shape. Check the jam nut on the adjustable end after each length change, and keep the threads clean and lightly greased so the length can be adjusted again later.
- Grease joints after installation and periodically
- Inspect limiting washers for compression or cracks
- Re-check jam nut after adjusting
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9120FJK |
| UPC | 70000513570 |
| Position | Front |
| Tubing | 1.25 inch outside diameter by .250 inch wall, 4130 chrome moly steel |
| Rod ends | Greaseable narrow Johnny Joint, both ends |
| Adjustable end thread | 1 inch right-hand, with jam nut |
| Finish | Semi-gloss black powder coat (arm), gold zinc plating (Johnny Joint end) |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers 2007–2014 Jeep Wrangler (JK) models in the 70th Anniversary, Rubicon, Sahara and Sport trims, plus the Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X and X trims.
Years before 2007 and after 2014, along with TJ, LJ and other Jeep models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the length, then lock the adjustable rod end with the supplied jam nut. Grease both narrow Johnny Joint rod ends after installation, since the design is greaseable. Changing the length shifts where the axle sits, so have an alignment shop check the track once the bar is set.
What’s included
Rubber limiting washers are included for the frame end, along with the jam nut for the adjustable rod end.
Not included: Check the package contents against your installation before starting, and confirm you have any mounting hardware you need.








