Overview
The Icon Suspension 21025 is a rear adjustable track bar for 2007–2017 Jeep Wrangler JK vehicles. A rear track bar keeps the rear axle centered under the body, so the axle does not drift to one side once the suspension is lifted.
It covers 2.5 to 4.5 inches of lift, with 2.5 to 4 inches as the narrower feature range. It is built from 1-1/4 inch x .250 wall 1026 seamless DOM tubing with a dual stage polyurethane and Delrin bushing on one end.
Key features
- Adjustable on the vehicle for track alignment
- Dual stage polyurethane and Delrin bushing with minimal deflection
- Rod end with pinch bolt housing
- It allows full suspension articulation without binding.
- CNC machined and bent tubing
Keeping the rear axle centered
The rear track bar holds the axle under the body, so it is the main control for side to side axle movement at the back of the vehicle. Once a suspension lift is in, the axle’s position can drift, and a bar that is too short or too long shifts it sideways. Rear tire wear, a rear end that feels unsettled, or a body that seems offset can all point to a setting that needs checking.
Adjustment should happen with the suspension at ride height, and the alignment should be checked after any length change. Bushings at the frame end and bolts at the axle bracket often wear together, so inspect them before resetting the bar. Shocks, control arms and bump stops should be looked at during the same service, since they affect how the axle moves over bumps and off road.
- Set length with the vehicle at ride height
- Inspect bushings and bolts before resetting the bar
- Recheck alignment after every length change
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 21025 |
| UPC | 70000682046 |
| Position | Rear |
| Vehicle type | 2- and 4-door Jeep JK |
| Lift range | 2.5 to 4.5 inches (description), 2.5 to 4 inches (feature list) |
| Tubing | 1-1/4 inch x .250 wall 1026 seamless DOM |
| Bushing | Dual stage polyurethane / Delrin |
| Made in | U.S.A. |
Vehicle fitment
It fits 2007–2017 Wrangler JK trims 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X, along with the Unlimited versions of those trims.
Model years 2018 and later, the JL generation, and pre-2007 TJ and LJ Wranglers fall outside this bar’s fit. Confirm fit for your vehicle’s year, model and trim before buying.
Installation notes
Install with the application specific hardware in the OEM mounts, then set the bar length with the suspension at ride height so the axle sits centered. Have the alignment checked after the adjustment, since a changed track bar length alters rear axle position.
What’s included
It includes the bar, bushing kit and rod end with pinch bolt housing. Application specific hardware is needed for installation.
Not included: Confirm the hardware quantities and what comes with the bar before installing.






