Overview
The Currie CE-9120TJS is an adjustable Johnny Joint front track bar for the 1984-2001 Jeep Cherokee XJ, 1997-2006 Jeep Wrangler TJ, 2004-2006 Jeep Wrangler LJ and 1986-1992 Jeep Comanche MJ.
It replaces the stock front track bar and is designed to center the front axle under the vehicle after a lift kit is installed or the springs settle. It is made from heavy wall DOM tubing.
Key features
- Adjustable length Johnny Joint design
- 5/8-inch bolt at the frame end for added strength
- Housing end keeps the factory bolt
- Grade 8 hardware
Front axle alignment after a lift
A lift changes the geometry of the front axle, and the stock track bar often can no longer hold the axle centered. Once the height changes, the axle can shift toward one side, which affects steering feel and tire wear. An adjustable track bar lets you set the length so the axle sits square under the frame.
Set the length with the vehicle at its normal ride height, then recheck after the springs settle over the first few weeks of driving. Inspect the joint for play and check the frame bracket for cracks, since drilling can weaken a bracket that is already worn. Get an alignment after any track bar change.
- Set length at normal ride height
- Check the joint for play
- Inspect the frame bracket for cracks
- Get an alignment after installation
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9120TJS |
| UPC | 70000519483 |
| Finish | Black powder coated |
| Tubing | 1-1/4 inch, .250 inch heavy wall DOM |
| Joint | 2-1/2 inch Johnny Joint |
| Frame end bolt | 5/8 inch Jeepspeed track bar bolt |
| Hardware | Grade 8 |
| Quantity | Each |
| Fitment type | Direct Fit |
Vehicle fitment
The track bar fits the Cherokee XJ, Wrangler TJ, Wrangler LJ and Comanche MJ, which are the stock models it replaces.
It does not cover JK, JL or JT models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling equipment is required for installation. Support the front axle securely while drilling and bolting the track bar in place.
What’s included
Each listing covers one track bar with its 5/8-inch Jeepspeed bolt and Grade 8 hardware.
Not included: drilling equipment, which is required for installation.








