Overview
The Pro Comp JTB402 is a front adjustable track bar for the Jeep Wrangler JK, sized for a 2 to 6 inch lift. It locates the front axle accurately once the lift is installed. It is made of 4130 chromoly tubing with an aircraft quality high angle rod end for maximum articulation. The part is in the front position with part code EXPJTB402.
The bar fits the 2007-2014 and 2018 Jeep Wrangler JK in the 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X and X trims, and it fits both 2 and 4-door models.
Key features
- 4130 chromoly tubing
- Aircraft quality high angle rod end
- Adjustable length for axle centering
- Powdercoat finish
- Hardware kit included
- 2 and 4-door models listed
Setting the length at your lift
A track bar keeps the axle centered side to side under the body. When a lift raises the body, the factory bar angle changes, and an adjustable bar lets the length be set so the axle sits back in the middle. Setting the length correctly keeps the steering from wandering and the axle from shifting toward one side during travel.
Bump steer is the main thing to check after a change in length. If the bar and steering linkage are not at matching heights, the front wheels can steer on their own over bumps. Check bump steer with a helper after every adjustment.
Rod ends and bushings wear with use, especially on rough trails where the bar sees repeated articulation. Check the ends for play and grease or replace them as needed. A tight, well-aligned front end is easier to keep centered than one with worn joints.
- Check bump steer after each length change
- Inspect rod ends for play at every service
- Align the front end once the length is set
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | JTB402 |
| Listed part code | EXPJTB402 |
| UPC | 614901116533 |
| Position | Front |
| Material | 4130 chromoly tubing |
| Rod end | Aircraft quality high angle |
| Lift range | 2 inch to 6 inch |
| Finish | Powdercoat |
Vehicle fitment
Fitment covers the 2007-2014 and 2018 Jeep Wrangler JK in the 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X and X trims.
Vehicles outside the listed JK years and trims are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The adjustable length is used to center the front axle under the body at the chosen lift. Check the steering centering and the bump steer after the install, and align the front end once the length is set.
What’s included
The kit includes the adjustable front track bar, the powdercoated finish and a hardware kit. Check the parts list for any other brackets before starting the install.












