Overview
The Skyjacker Rear Adjustable Track Bar JKRTBA717 is a rear track bar for the 2007–2018 Jeep Wrangler JK, part number JKRTBA717. Its length can be changed to bring the axle back to the center of the body.
It fits 2-door and 4-door Wrangler JK models and is suited to 0 to 4 inches of lift. The fitment covers 2007–2018 vehicles, so check your model year before ordering.
Key features
- Adjustable length for axle centering
- Fits 2-door and 4-door models
- Suited to 0 to 4 inches of lift
- Rear position with direct fit
Rear track bar role
Rear track bars keep the axle centered side to side at the rear. Adjustable designs let you set the length when the rear axle has been moved. Check the bar’s clearance against the body and exhaust during articulation.
Worn bushings cause a clunk when the vehicle shifts under load and can allow the axle to drift sideways. Inspect the bar ends, bushings and frame mounts whenever the rear alignment or ride changes, and replace any part that has play. Rear and front track bars should be checked together after a lift, since both affect how the axle is positioned.
After any length change, drive slowly on a straight road and watch for the vehicle pulling or the rear wandering. Retighten hardware after the first few drives, since new bushings can settle.
- Clearance to the body and exhaust
- Bushing wear and cracked rubber
- Frame mount condition
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JKRTBA717 |
| UPC | 803696238203 |
| Position | Rear |
| Adjustment | Adjustable length |
| Lift range | 0 to 4 inches |
| Models | 2-door and 4-door |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), including Unlimited models in listed trims. Wrangler YJ, TJ, LJ and JL generations are outside this fit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Adjust the length so the axle sits centered, then have the alignment checked. Before starting, check the mounting hardware and bushings you need.
What’s included
The package is the rear adjustable track bar only.
Not included: Confirm the mounting hardware and bushings you need before starting the installation.









