Overview
The Rugged Ridge 18305.06 is an adjustable rear track bar for 2007–2018 Jeep Wrangler JK models with suspension lifts of 2 to 5.5 inches. A rear track bar helps re-center the rear differential and restore proper tracking, and this one uses the factory mounting locations.
It covers 2007–2018 Jeep Wrangler JK models in the trims named here, including Unlimited versions.
Key features
- Constructed of high-strength 1.25-inch DOM steel tubing
- Urethane bushings for superior deflection in off-road conditions
- Semi-gloss black powder coated finish
- Adjustable length to re-center the rear differential
- It fits 2- and 4-door JK models.
Restoring rear axle tracking
A rear track bar re-centers the rear differential as the suspension changes height. When a lift raises the body, the axle can shift toward one side, and tracking can feel uneven at speed or on a steep off-camber trail. Adjusting the bar length brings the axle back to center, which is why the setting should be made once the suspension has settled at its final height.
Urethane bushings are used in this type of bar for the flex they allow, but they can wear or crack with heavy use, so check them after rough trips. Factory mounting points keep the bar close to its original geometry, and the bolts at those points should be checked for tightness. Related parts such as a front track bar relocation bracket may also be needed on a lifted JK, so review the whole steering and axle layout before setting the length.
- Check urethane bushings for cracks
- Retorque mounting bolts after the first drives
- Recheck alignment after each adjustment
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 18305.06 |
| UPC | 804314294830 |
| Position | Rear |
| Lift range | 2 to 5.5 inches |
| Tubing | 1.25-inch DOM steel |
| Bushings | Urethane |
| Finish | Semi-gloss black powder coat |
| Mounting | Factory mounting locations |
Vehicle fitment
It fits 2007–2018 Jeep Wrangler (JK) in the trims named above, including the Unlimited versions.
It does not fit the JL generation or pre-2007 TJ and LJ Wranglers. Confirm fit for your vehicle’s year, model and trim before buying.
Installation notes
It installs at the existing factory mounting points. Set the length to re-center the rear axle, then check alignment after the lift is in place. Check the included hardware against your installation before starting.
What’s included
The package is the adjustable track bar itself. Confirm the hardware needed for installation before starting.
Not included: The front track bar relocation bracket, part 18205.08, is a separate part.

















