Overview
The TeraFlex Monster Front Forged Adjustable Trackbar, part number 1753418, is a forged front track bar for 2007–2015 Jeep Wrangler (JK) models. It adjusts the lateral position of the axle for proper alignment. The forged construction is designed for added strength over the factory track bar.
The bar uses OE style rubber bushings with an additional rate plate for control during handling. It is a complete bolt-on component that needs no bracketry changes, and it is designed to cycle through the full range of suspension travel without interfering with other components. It is designed for JK Wrangler models with 0 to 6+ inches of lift.
Key features
- Forged construction, designed for added strength over the factory track bar
- OE style rubber bushings with an additional rate plate
- Adjustable lateral axle position for proper alignment
- Bolt-on with no bracketry changes
- Designed to cycle through full suspension travel
- Designed for 0 to 6+ inches of lift
Adjusting track bar length
A track bar keeps the axle centered side to side, and its length changes how the axle sits under the body. When the bar is adjusted, the axle moves, so the alignment should be checked afterward. Uneven tire wear and a wandering feel at speed are common signs that the axle is off center.
Bushing condition matters as much as the bar itself. Rubber bushings wear over time, and a loose bushing lets the axle drift, so inspect the bushings and frame mount at the same time as the bar. If the lift height changes, recheck the bar length so the axle stays centered and the suspension keeps its full travel.
- Check alignment after every length change
- Inspect bushings for cracks or looseness
- Confirm clearance at full suspension travel
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1753418 |
| UPC | 843885023258 |
| Position | Front |
| Construction | Forged |
| Bushings | OE style rubber with additional rate plate |
| Lift range | 0 to 6+ inches |
| Installation | Bolt-on, no bracketry changes |
| Strength | 230% stronger than factory track bar (manufacturer claim) |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer list places this bar on 2007–2015 Jeep Wrangler (JK) models with Rubicon, Sahara, Sport, X and Unlimited trims, plus the 70th Anniversary editions.
Later JK years are outside the 2007–2015 fitment range. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the axle position with the adjuster, then have the alignment checked, since the bar’s purpose is to change lateral axle position. The bar is designed for 0 to 6+ inches of lift, so compare your lift height with that range before installing.
What’s included
Compare the package contents with your installation before starting.
Not included: Confirm whether bolts or mounting hardware come with the bar before starting the installation.














