Overview
The TeraFlex 1754418 is an adjustable rear trackbar for Jeep Wrangler JK models, sold under the Monster Forged name. A rear track bar, also called a Panhard bar, keeps the rear axle centered side to side, and this version lets you set lateral axle alignment on a lifted vehicle. TeraFlex designed it for lifts from 0 to 6 inches.
TeraFlex rates this track bar at 230% stronger than the factory track bar. It uses OE style rubber bushings with an additional rate plate for handling and responsive control. The design maximizes rear passenger spring clearance and cycles through the full range of suspension travel without contacting other components.
Key features
- Forged construction, rated by TeraFlex at 230% stronger than the factory track bar
- Adjustable length for lateral alignment of the rear axle
- OE style rubber bushings with an additional rate plate
- Maximizes rear passenger spring clearance
- Moves through full suspension travel without interfering with other components
- Can be used with or without a track bar relocation bracket
Rear axle centering and mounting options
The rear track bar keeps the rear axle centered side to side while the springs compress. Because a lift changes the angle of the bar, the rear axle can drift toward one side of the vehicle. An adjustable bar makes it possible to restore that centering after the lift is installed.
Mounting with or without a relocation bracket changes where the bar attaches and how it sits at ride height. Choose the setup that gives the bar the most level position across its travel, and keep it clear of brake lines and the exhaust.
Inspect the bushings and bar ends when you service the rear suspension. Loose ends, cracked rubber and bent brackets all change the axle position over time, so a quick check after rough trails is a practical habit.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1754418 |
| UPC | 843885023364 |
| Mounting location | Rear |
| Type | Adjustable |
| Lift height | 0 to 6 inches |
| Bushings | OE style rubber with additional rate plate |
| Strength rating | 230% stronger than factory track bar (per TeraFlex) |
| Bracket use | With or without a track bar relocation bracket |
Vehicle fitment
The manufacturer fitment list covers 2007 to 2015 Jeep Wrangler (JK) models, including the Rubicon, Sahara, Sport and X trims in both 2-door and Unlimited 4-door forms.
It fits 2007 to 2015 Jeep Wrangler (JK) models, including Rubicon, Sahara, Sport and X trims in both 2-door and Unlimited 4-door forms. Wrangler JK models from 2016 to 2018, along with TJ, LJ and YJ Wranglers, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The track bar is bolt-on, and the choice of mounting with or without a relocation bracket depends on your lift setup. Set the length so the rear axle sits centered before final tightening. Lift the vehicle with stands rated for its weight before working under the rear end.








