Overview
The Rubicon Express complete adjustable control arm kit is an 8-arm set for the 1997-2006 Jeep Wrangler TJ and the 1993-1998 Grand Cherokee ZJ. It covers front lower, front upper, rear lower and rear upper positions and is intended for owners who want adjustable arms at both ends of the link.
The upper arms are super-flex and adjust from factory length to one inch longer. The lower arms use the Super-Ride design, which is adjustable as well. Together they allow setup of pinion angle, caster and wheelbase.
Each upper arm uses a super-flex joint, and the lower arms use the Super-Ride design, so both ends of the link can be set during installation. The kit bolts directly onto an existing short arm kit.
Key features
- Eight control arms in a complete kit
- Adjustable super-flex upper arms with a factory length to +1 inch range
- Adjustable super-ride lower arms
- PT MEG bushings and greasable Zerk fittings
- Power coat finish
Super-Ride lower arms and setup
Super-Ride lower arms are built to keep the axle moving through rough terrain while still allowing adjustment for setup. The design helps control the axle under load, but the bushings and joints still do much of the work, so the condition of those parts shapes how the arms perform over time.
When setting up adjustable arms, start with the vehicle at ride height and the tires on the ground. Adjust the uppers and lowers in small steps, measuring pinion and caster after each change. Clearance at full articulation should be checked before the vehicle sees trail use, since a small change in length can change how the arms move.
- Set the vehicle at ride height before measuring
- Adjust in small steps and measure each time
- Check clearance at full suspension travel
- Inspect the bushings after the first trail run
Specifications
| Brand | Rubicon Express |
|---|---|
| Included | 8 control arms |
| Upper arm adjustment | Factory length to +1 inch |
| Upper arms | Adjustable super-flex |
| Lower arms | Adjustable super-ride |
| Bushings | PT MEG |
| Lubrication | Greasable Zerk fittings |
| Finish | Power coat |
Vehicle fitment
The kit fits the 1997-2006 Jeep Wrangler TJ and the 1993-1998 Grand Cherokee ZJ, including Rubicon models.
Confirm fit for your vehicle’s year, model and trim before ordering, including any JK or LJ application.
Installation notes
Set pinion angle and caster after the arms are bolted in and the vehicle is at ride height, since both the upper and lower arms adjust. Check arm clearance at full suspension travel.
What’s included
Eight control arms in a complete set.












