Overview
The Rubicon Express RE4547 is a pair of Super-Flex lower control arms for the Extreme Duty 4-Link long arm system. They suit the TJ Wrangler and the front lower position of XJ, MJ and ZJ Cherokee-line models.
Each arm uses a rebuildable spherical bearing assembly with a large polymer race around a hard plated steel bearing. A threaded steel insert sets preload, and the non-metallic races keep the joint quiet, which Rubicon Express says allows extra flex without giving up on-road handling.
Key features
- Super-Flex lower control arm design
- Rebuildable spherical bearing assembly
- 2.25-inch polymer race around a 1.75-inch hard plated steel bearing
- Threaded steel insert for adjustable preload
- Greaseable with non-metallic races for quiet operation
Keeping spherical bearings healthy
A spherical bearing carries load in every direction while allowing the arm to pivot, so it works hardest on rough terrain where the axle twists. Grease keeps the bearing surfaces separated and protects the seals, which is why a greaseable joint needs regular attention. Dry or contaminated bearings wear quickly and begin to feel rough or loose.
Grease the joint after trail use, especially after water crossings or mud, and check for seal damage each time. Check preload by feel after installation and adjust the threaded insert if the arm feels loose or stiff. If play increases or the joint makes grinding noises, the bearing may need rebuilding or replacing before the arm is used hard again.
- Grease after water crossings and mud
- Check seals each time the joint is serviced
- Adjust preload if the arm feels loose or stiff
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE4547 |
| UPC | 614901136722 |
| Quantity | Pair |
| System | Extreme Duty 4-Link long arm |
| Bearing | Spherical, 2.25 in polymer race, 1.75 in steel bearing |
| Preload | Threaded steel insert |
| Lubrication | Greaseable |
Vehicle fitment
They suit the TJ Wrangler, covering the 1997-2006 model years, and the front lower position of XJ, MJ and ZJ Cherokee-line models, covering the 1984-2001 XJ, the 1986-1992 MJ and the 1993-1998 ZJ model years.
Check the arm length and adjustment against your 4-link build before installing, and confirm your vehicle’s year, model and trim before ordering.
Installation notes
The preload is set with the threaded insert, so set it at installation and grease the bearing once it is in place. Check that the arms match your 4-link system before fitting.
What’s included
A pair of Super-Flex lower control arms.

