Select your vehicle
-13%

Rubicon Express Super-Flex Front Lower Adjustable Control Arms – RE3722

Rubicon Express

Shop Jeep Wrangler JL Control Arms on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front lower adjustable control arms with Rubicon Super-Flex joints
  • Adjustment range for pinion, caster and wheelbase setup
  • Thick-wall DOM tubing, powder coated
  • Fits the 2020 Jeep Gladiator JT and 2018–2026 Jeep Wrangler JL
  • Part number RE3722

Description

Overview

The Rubicon Express Super-Flex front lower adjustable control arms (part RE3722) are tube control arms for the Jeep Wrangler JL and Gladiator JT. They are made for adjusting a short arm suspension, and they use the Rubicon Super-Flex joint and thick-wall DOM tubing.

The adjustment range lets you set pinion, caster and wheelbase, or replace damaged factory control arms. The Rubicon Super-Flex joint allows unrestrained axle movement off road. The arms are powder coated for corrosion resistance and covered by the Rubicon Express Advantage Warranty.

Key features

  • Rubicon Super-Flex joint for unrestrained axle movement, per the maker
  • Thick-wall DOM tubing
  • Adjustment range for pinion, caster and wheelbase
  • Powder coated for corrosion resistance
  • Can serve as a replacement for damaged factory control arms

Short arm suspension basics

Short arm suspensions rely on the lower arms to locate the axle, while the upper arms and coil springs control height and rebound. Lower arm length and mounting angle influence caster, pinion and wheelbase, which is why adjustable arms are popular when a lift or larger tires change the geometry. Make adjustments in small steps and recheck each setting before tightening.

When comparing options, look at the joint design, tube wall thickness and the quality of the bushings or ends at each mounting point. A joint that moves freely helps the axle follow uneven ground, but it also needs regular greasing or inspection depending on use. Watch for clunks, torn boots, grease leaks and uneven tire wear, which can signal worn joints or misaligned arms.

  • Recheck the jam nuts after the first drives
  • Inspect the joints for play during regular service
  • Replace worn ends in matched pairs

Specifications

Brand Rubicon Express
Part number RE3722
Position Front lower
Type Tube
Material Thick-wall DOM tubing
Joint Rubicon Super-Flex
Finish Powder coated
Fit Direct fit
Warranty Rubicon Express Advantage Warranty

Vehicle fitment

It fits the 2020 Jeep Gladiator JT and the 2018–2026 Jeep Wrangler JL, including two-door models and Unlimited four-door models. Make sure your year, model and trim match before ordering.

Earlier Wrangler generations such as the JK, and Wrangler JL years after 2022, are not on the list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Changing pinion and caster settings changes alignment, so have the alignment checked after these arms are installed.

What’s included

Check the package contents against your installation before starting, including whether mounting hardware is needed.

Fitment

VehicleYearsTrims
Jeep Gladiator2020Launch Edition, Overland, Rubicon, Sport, Sport S
Jeep Wrangler (JL)2018–2026Rubicon (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Rubicon Express RE3722 fit a Jeep Gladiator?

Yes, it fits the 2020 Jeep Gladiator. It is a direct fit for the 2020 Jeep Gladiator JT and the 2018–2026 Jeep Wrangler JL.

What does the Super-Flex joint do?

The Rubicon Super-Flex joint allows unrestrained axle movement off road. It is paired with thick-wall DOM tubing and a powder coated finish for corrosion resistance.

Can these arms set pinion and caster?

Yes. The adjustment range covers pinion, caster and wheelbase setup. Have the alignment checked after making those changes, since they shift the geometry of the front suspension.

Should both front lower arms be replaced at the same time?

Usually yes. Replacing both lower arms together keeps the geometry balanced on each side, so the axle stays square and tire wear remains even. Check the other arm's joint and bushings even if only one looks damaged.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JL Control Arms on Amazon