Overview
The Rubicon Express complete adjustable control arm kit is an 8-arm set for the 1997-2006 Jeep Wrangler TJ and the 1993-1998 Grand Cherokee ZJ. It includes front lower, front upper, rear lower and rear upper arms, and it is designed as a replacement for worn factory arms or as an upgrade to a short arm suspension.
The upper arms are adjustable from factory length to one inch longer, which gives room to set pinion angle, caster and wheelbase. The lower arms are fixed super-flex units with PT MEG bushings.
Key features
- Eight control arms in a complete kit
- Adjustable super-flex upper arms with a range from factory length to +1 inch
- Fixed super-flex lower arms
- PT MEG bushings and greasable Zerk fittings
- Power coat finish
- Direct bolt-on fit to an existing short arm kit
Setting up after installation
Once the eight arms are mounted, set the upper arm length before anything else. Use the adjustment range to dial in pinion angle, then set caster, since the two angles interact and changing one shifts the other. Work with the vehicle at ride height so the suspension sits where it will drive, and recheck both settings after the first few trail runs.
Bushings and fittings need regular attention on a kit like this. Grease the Zerk fittings on the super-flex joints at the interval you use for other driveline and suspension parts, and inspect the bushings for cracks or play during each service. Worn or damaged arms can change alignment, so replace any that show bent tubes or torn bushings, and recheck the setup once a new arm is fitted.
- Check pinion angle after the first trail runs
- Inspect bushings for cracks at each service
- Recheck caster after any arm replacement
Specifications
| Brand | Rubicon Express |
|---|---|
| UPC | 700008131111 |
| Included | 8 control arms |
| Upper arm adjustment | Factory length to +1 inch |
| Lower arms | Fixed super-flex |
| Bushings | PT MEG |
| Lubrication | Greasable Zerk fittings |
| Finish | Power coat |
Vehicle fitment
It fits the 1997-2006 Jeep Wrangler TJ and the 1993-1998 Grand Cherokee ZJ.
Confirm your vehicle’s year, model and trim before ordering, especially for the 2007-2018 Wrangler JK or the 2004-2006 Wrangler LJ.
Installation notes
Set the upper arm length, pinion angle and caster after the kit is mounted and the vehicle is at ride height. Check that the arms clear the frame and the axle at full articulation.
What’s included
Eight control arms: front lower, front upper, rear lower and rear upper.















