Overview
The Rubicon Express complete adjustable control arm kit is an 8-arm set for the 1997-2006 Jeep Wrangler TJ and the 1993-1998 Grand Cherokee ZJ. The kit has front lower, front upper, rear lower and rear upper arms, and the uppers are the adjustable part of the set.
The upper arms are the Super-Ride design, adjustable from factory length to one inch longer. The lower arms are fixed. It is a direct bolt-on for an existing short arm kit and replaces damaged factory control arms.
The arms are built from thick wall DOM tubing using Rubicon Express’s Rubicon arm design, which is intended for rough trail use. The upper arms are the adjustable Super-Ride parts of the set.
Key features
- Eight control arms in a complete kit
- Adjustable super-ride upper arms
- Fixed super-ride lower arms
- Upper adjustment from factory length to +1 inch
- PT MEG bushings, greasable Zerk fittings and power coat finish
Setting arm length and alignment
Control arms locate the axle and carry braking and drive forces, so their geometry shapes how the vehicle tracks and how the axle sits under load. On a Wrangler TJ or Grand Cherokee ZJ, changing arm length moves the axle’s pinion angle, so the adjustable upper arms are used together with the fixed lowers to bring the driveline back into a workable range after a lift. Any change in arm length should be followed by a wheel alignment.
Bushings and joints wear over time. Worn ones let the axle shift, which can cause clunks and uneven tire wear. Inspect the arm mounts, bushings and greasable fittings at regular intervals, and grease the fittings if your kit has them. Recheck the bolts after the first few trail runs, since repeated articulation can loosen them.
Specifications
| Brand | Rubicon Express |
|---|---|
| UPC | 700008131131 |
| Included | 8 control arms |
| Upper arms | Adjustable super-ride |
| Upper arm adjustment | Factory length to +1 inch |
| Lower arms | Fixed super-ride |
| Bushings | PT MEG |
| Lubrication | Greasable Zerk fittings |
| Finish | Power coat |
Vehicle fitment
It fits the 1997-2006 Jeep Wrangler TJ and the 1993-1998 Grand Cherokee ZJ.
Fitment is for the TJ and ZJ models above. Check fit against your vehicle’s year, model and trim before buying.
Installation notes
Set pinion angle and caster through the upper arm adjustment after the arms are installed and the vehicle is at ride height. The lower arms are fixed, so their length is not changed during setup.
What’s included
Eight control arms in a complete set.















