Select your vehicle
-13%

Bilstein 5160 Series Remote Reservoir Shock Absorber – 25-256284

Bilstein

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear remote reservoir shock for 2015–2022 Chevrolet Colorado and GMC Canyon
  • Remote reservoir with increased cooling capacity and wheel travel
  • Monotube design with velocity sensitive digressive valve settings
  • 360 degree swivel banjo hose fitting

Description

Overview

The Bilstein 5160 Series 25-256284 is a rear remote reservoir shock absorber for the 2015–2022 Chevrolet Colorado and the 2015–2022 GMC Canyon. The reservoir is separate from the shock body, and it gives increased cooling capacity and wheel travel compared with a traditional shock.

Each unit has a 46mm body with OEM top and bottom mounts, and it uses a monotube design for consistent damping. The valve settings are velocity sensitive and digressive, and they are tuned for each application. Each shock has a 360 degree swivel banjo hose fitting for a low profile installation. The unit bolts into the factory mounting points. Compare the installed length with the rear shock you are replacing before ordering.

Key features

  • Remote reservoir for increased cooling capacity
  • Monotube design for consistent damping
  • Velocity sensitive digressive valve settings
  • 360 degree swivel banjo hose fitting
  • 46mm body with OEM mounts

Remote reservoir shock upkeep

A remote reservoir shock keeps its damping oil and gas in a separate chamber, which helps it stay cooler during long runs on rough ground. The hose and fittings are the parts most exposed to dirt, stones and flex, so they deserve regular attention. Check the reservoir mount for cracks as well, since a loose reservoir can rub against the frame or a tire.

Inspection is the main job for most owners. Look along the hose for chafing, check the banjo fittings for seepage, and confirm the reservoir sits clear of the tire at full suspension travel. When the vehicle sees heavy off-road use, shorter service intervals can catch problems early. A worn shock tends to feel softer over bumps and may leak oil from the body.

  • Check the hose along its full length for rubbing
  • Inspect banjo fittings and clamps for seepage
  • Confirm the reservoir clears the tire at full travel
  • Look at the shock body for oil after trail use

Specifications

Brand Bilstein
Part number 25-256284
Shock series 5160 Series
Position Rear
Shock type Piggyback remote reservoir, monotube
Body diameter 46mm
Top mount OEM
Bottom mount OEM
Hose fitting 360 degree swivel banjo
Gas charge Gas charged
Fitment type Direct fit

Vehicle fitment

It fits the 2015 through 2022 Chevrolet Colorado and the 2015 through 2022 GMC Canyon.

Colorado and Canyon models outside 2015 to 2022, and the full-size Silverado and Sierra pickups, are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One rear remote reservoir shock absorber.

Installation notes

The remote reservoir needs room for its hose and must be routed clear of moving parts. Check the banjo fitting and hose route before tightening the mounts.

Fitment

VehicleYearsTrims
Chevrolet Colorado2015–2022Base, LT, WT, Z71
GMC Canyon2015–2022AT4, All Terrain, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Bilstein 25-256284 fit a 2019 Chevrolet Colorado?

Yes. This rear remote reservoir shock fits the 2015 to 2022 Chevrolet Colorado, so a 2019 model is covered. Confirm the rear position before ordering.

What does the remote reservoir do?

The remote reservoir is a separate chamber connected to the shock by a hose. It gives increased cooling capacity and wheel travel compared with a traditional shock, and it is mounted apart from the shock body.

Is the banjo fitting included?

Yes, the banjo fitting is built into each shock as a 360 degree swivel hose fitting. Plan for the hose route when you mount the reservoir, and keep it clear of moving parts.

Can a remote reservoir shock be serviced?

Some remote reservoir shocks can be rebuilt, but many owners replace them when wear shows. Check the hose, banjo fittings and reservoir mount for leaks or chafing during routine service. Confirm service options before deciding, since the rebuild process depends on the unit.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon