Overview
The Bilstein 24-141734 is a rear shock absorber from the 4600 Series, built as a monotube gas charged unit for stock lift height. It is Direct Fit for 2-door and 4-door models, with a yellow body and a blue boot.
The monotube layout keeps the working oil in a single tube with a dividing piston, which lets the oil expand as it heats rather than foaming. The design keeps damping consistent as temperatures climb, and the piston valving can be tuned separately for compression and rebound. The rear position makes this unit a candidate for replacing a worn rear shock on a stock vehicle.
Key features
- Monotube gas charged design with a dividing piston
- Precision formed shock body with machined valving components
- Induction hardened steel shaft, chrome plated and polished
- High quality seals
- Rear position with yellow body and blue boot
- Limited lifetime warranty stated by Bilstein
Rear shock installation checks
Rear shocks on a stock vehicle are usually the first suspension parts to show age, since they absorb every bump and load on the rear axle. A worn unit can leave the rear bouncing after dips, sagging on one side or leaking oil on the body. Before buying, measure the shock you are removing, including the installed length and the spacing between the mounts, and check whether it is the rear or front unit.
Monotube gas charged designs are often chosen for their steady damping as they warm, but the mounting bushings and bolts still need inspection. Replace cracked or hardened bushings while the old shock is off, and torque the fasteners to the vehicle’s service specifications. Matching both rear units keeps the axle balanced.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-141734 |
| UPC | 651860605593 |
| Series | 4600 Series |
| Position | Rear |
| Design | Monotube |
| Charge | Gas charged |
| Lift height | Stock |
| Fitment | Direct Fit, 2-door and 4-door models |
| Body color | Yellow |
| Boot color | Blue |
| Shaft | Induction hardened steel, chrome plated and polished |
| Warranty | Limited lifetime |
| Quantity | Each |
Vehicle fitment
It is marked Direct Fit for 2-door and 4-door models, with no years, makes or models named. Confirm fit for your vehicle’s year, model and trim before ordering.
Rear and front 4600 Series units carry different part numbers, so match the position as well as the vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the rear position against the shock you are removing. Replacing a rear shock means supporting the axle or body securely, so use stands and follow the vehicle’s service procedure.
What’s included
One rear shock absorber per part number, with the blue boot shown in the specifications.
Not included: Mounting hardware is not included.












