Overview
The Bilstein 5100 Series steering damper, part number 33-170862, is a stabilizer-only unit for 2005–2007 Ford F-250 Super Duty and F-350 Super Duty. It uses a cantilever lower mount and a stem upper mount on an 11mm shaft, with a 46mm non-coilover smooth body.
The monotube gas pressure design is intended to limit cavitation and foaming, and the damper is designed to reduce steering component vibration and wear. The collapsed length is 18.11 inches, the extended length is 27.56 inches, and the travel length is 9.45 inches.
Key features
- Monotube gas pressure design that Bilstein says eliminates cavitation and foaming
- Digressive valving for controlled steering damping
- Cantilever lower mount and stem upper mount
- 46mm non-coilover smooth body
- Triple C process zinc finish for corrosion resistance
- Travel length of 9.45 inches
Steering damper maintenance
A steering damper absorbs quick movements in the steering linkage, which helps keep the front wheels steady over ruts and at highway speed. Because the damper is mounted between the frame and the steering linkage, wear at its mounts and bushings changes how it works. Inspect the body for fluid leaks, and check the rubber or polymer bushings for cracking, since a worn bushing lets the damper rattle and reduces its effect.
When a damper is replaced, check the steering linkage as well, including tie rod ends, the drag link and any idler arm. Loose or worn parts can make a new damper feel less effective and can produce clunks. After installation, test the steering with the truck stationary and then on a short drive, and recheck the mount bolts after the truck has been on rough ground.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-170862 |
| UPC | 651860664804 |
| Series | 5100 Series |
| Type | Stabilizer only |
| Single / dual | Single |
| Collapsed length | 18.11 in |
| Extended length | 27.56 in |
| Travel length | 9.45 in |
| Lower mount | Cantilever |
| Upper mount | Stem |
| Shaft diameter | 11mm |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Mono tube |
| Reservoir | No |
| Finish | Zinc plated |
| Brackets included | Not included |
Vehicle fitment
It fits the 2005–2007 Ford F-250 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT) and the 2005–2007 Ford F-350 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT).
The list covers 2005–2007 Super Duty trucks only. The 2008–2016 F-250 and 2008–2013 F-350 Super Duty years are not included on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the lower mount is a cantilever and the upper mount is a stem, compare both mounting points with your steering linkage before installing. Support the vehicle before working on the steering components.
What’s included
One 5100 Series steering damper, stabilizer only.
Not included: brackets. Boot status is listed inconsistently, so check the package contents for a shock boot.









