Overview
The Bilstein 5100 Series 24-286558 is a single front steering damper for the 2017–2022 Ford F-250 Super Duty and F-350 Super Duty in 4WD models. It is an upgrade over the factory steering damper and is sold as a stabilizer only.
A steering damper sits between the frame and the steering linkage. It absorbs small, fast movements in the steering, which reduces the vibration that comes through the wheel on rough ground or at speed. Bilstein says its 5100 steering dampers reduce steering vibrations that naturally occur on trucks, and that the design gives a significant improvement in steering, handling and comfort.
The body is 46mm with a zinc coating for resistance to harsh conditions, and the unit is built to match the rest of the 5100 line. Its collapsed length is 16.93 inches and its extended length is 26.50 inches, so measure the damper you are replacing before ordering.
Key features
- Damps small, fast steering movements and reduces steering vibration
- Upgrade over factory steering dampers
- Zinc-coated 46mm smooth body
- Single-damper design, stabilizer only
- Black shock boot included
How steering dampers work
A steering damper resists quick, small movements in the steering, so it helps keep the front wheels from shaking or wandering when the truck meets rough ground or uneven road surfaces. It works alongside the tie rods and the steering linkage, and it is usually mounted between the frame and that linkage. Because it controls fast movement, it is often one of the first parts to show wear when the front end has loose joints.
Worn or failing dampers can cause a steering wheel that vibrates at speed, a clunk when turning, or a feeling of play. Before blaming the damper, check the tie rod ends, ball joints, wheel bearings and tire balance, since these parts can produce the same symptoms. Tire size changes and alignment work also affect how much the damper must control, so keep those in mind after any suspension change.
- Inspect the boot for cuts or hardened sections
- Check the mount bushings for play
- Look for oil on the body after a long drive
- Confirm the front-end joints are tight before replacing the damper
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-286558 |
| Shock series | 5100 Series |
| Type | Steering damper, stabilizer only |
| Position | Front |
| Single or dual | Single |
| Body diameter | 46mm ID, smooth body |
| Collapsed length | 16.93 in |
| Extended length | 26.50 in |
| Finish | Zinc plated |
| Boot | Black, included |
| Brackets | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2017 through 2022 Ford F-250 Super Duty and the 2017 through 2022 Ford F-350 Super Duty.
Super Duty trucks from before 2017, the F-150 and the F-450 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One steering damper with its black shock boot.
Not included: Brackets are not included.
Installation notes
Because the brackets are not included, check that your truck’s steering damper mounting points match the damper before you order, and confirm the brackets you need are available.









