Overview
The Rancho RS5413 is a single front steering stabilizer cylinder for select Ford Excursion and Ford Super Duty trucks, part of Rancho’s RS5000 series. It bolts to the original equipment mounts and includes a red dust boot.
It fits 2004-2005 Ford Excursion models in Eddie Bauer, Limited, XLS and XLT trims, and 2005-2007 Ford F-250 and F-350 Super Duty models in Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims. It works as a stabilizer for both stock and lifted applications.
Key features
- Single front stabilizer cylinder
- Bolts to original equipment mounts
- Red dust boot
- Part of the RS5000 series
Choosing a stabilizer setup
A steering stabilizer cylinder dampens quick movements at the front wheels, so the steering wheel does not kick back when the tires hit ruts or rocks. On a truck with a solid front axle, the stabilizer works alongside the track bar and tie rods, and the forces it sees rise with heavier tires and bigger lifts. Wear shows up as steering wander, a loose feel near center, or fluid seeping from the cylinder body.
When inspecting the old unit, check the rod ends and bushings for play, look for pitted or bent rods, and make sure the dust boot is intact so grit does not reach the seals. Replacing the stabilizer and its mounts together is common, since worn bushings can make a new cylinder feel loose. Torque the fasteners to the figures in your service manual and recheck them after the first few drives.
- Check rod ends for play after removing the old unit
- Inspect the dust boot for cracks or tears
- Replace worn mounting bushings at the same time
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5413 |
| UPC | 10039703541302 |
| Series | RS5000 Series |
| Type | Stabilizer only |
| Position | Front |
| Single / dual | Single |
| Fitment | Direct fit |
| Shock boot | Red dust boot |
| Brackets | Not included |
Vehicle fitment
It fits 2004-2005 Ford Excursion and 2005-2007 Ford F-250 and F-350 Super Duty models in the trims named above.
Excursion models outside 2004-2005 and Super Duty models outside 2005-2007 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brackets are not included, so check your Ford’s existing stabilizer mounting points against the cylinder before installing.
What’s included
The package includes the stabilizer cylinder and a red dust boot.
Not included: brackets.









