Overview
The Bilstein 5100 Series Shock Absorber, catalog number 33-247717, is a Bilstein shock from the 5100 Series. No further description of the shock is provided.
Replacing a 5100 Series shock
Replacing a worn shock restores damping control, keeps the tires in contact with the road, and reduces the body motion that causes fatigue on long drives. Before removing anything, note the mounting orientation, the bolt sizes and whether the shock is front or rear, so the new unit goes back correctly.
Compare the replacement’s length and stroke with the old shock at both full extension and full compression. A unit that is too long or too short can bind, bottom out, or strain the mounts. Mounting eyes and bushings should match the original style, since a shock with the correct length can still fail to fit.
Inspect nearby parts while the suspension is open. Look at the springs, bump stops and the mounting brackets for cracks or wear. Shocks are commonly replaced in pairs on the same axle so both sides control motion the same way, and the other axle should be checked for similar wear.
Specifications
| Brand | Bilstein |
|---|---|
| Series | 5100 Series |
| Catalog number | 33-247717 |
| UPC | 651860764603 |
| Fitment type | Direct Fit |
Vehicle fitment
The shock is a Direct Fit part, so compare your year, model and trim with the application before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents, quantity and any mounting parts against your installation before starting.









