Overview
The Bilstein 4600 Series Shock Absorber, part number 24-128933, is a rear shock that fits the 2002–2006 Cadillac Escalade EXT (Base) and the 2002–2006 Chevrolet Avalanche 1500 in several trims. It is a gas-charged monotube unit with a 2 in. body and boots, sized as a direct replacement with no lift or drop.
Gas-charged monotube shocks keep the oil and gas in a single tube. This layout lets heat move from the oil to the outer surface of the body, where it dissipates better than in many twin-tube designs. A separate dividing piston gives the oil room to expand as it heats, which supports steady damping when the shock works hard. The unit has a yellow finish, no reservoir, and comes with boots.
If you are matching a replacement, compare the 2 in. body diameter, the rear position and the trims named above against the shock you are removing. The Escalade EXT and Avalanche 1500 are separate vehicles, so check the one you own.
Key features
- Gas-charged monotube body
- Dividing piston for oil expansion as heat builds
- Piston head tuning for compression and rebound
- Extrusion-formed tube with tight tolerance.
- Rear position with direct fit
- Boots included, no reservoir
- Yellow finish in the 4600 Series
Matching a replacement rear shock
Replacing a rear shock is simplest when the old unit is measured before the new one is ordered. Note the overall installed length, the spacing between the eye mounts and the stud diameter, and confirm the vehicle is sitting at its normal ride height during the check. Matching those numbers makes it easier to confirm that the new shock will seat correctly without forcing the mounts.
Gas-charged monotubes tend to suit trucks and utility SUVs that carry loads or tow, because the damping stays more consistent as the oil warms. Keep the boots clean and free of cracks, and inspect the bushings at the mounting points. Rear shocks are often replaced in pairs so both sides of the axle respond the same way.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-128933 |
| UPC | 651860565668 |
| Shock series | 4600 Series |
| Type | Monotube |
| Body diameter | 2 in. |
| Position | Rear |
| Hydraulic / gas charged | Gas charged |
| Fitment type | Direct fit |
| Lift height | 0 in. lift or drop |
| Finish | Yellow |
| Reservoir | No |
| Boots included | Yes |
Vehicle fitment
It fits the 2002–2006 Cadillac Escalade EXT in the Base trim. It also fits the 2002–2006 Chevrolet Avalanche 1500 in the Base, LS, LT, North Face, On Road Edition, WBH, Z66 and Z71 trims.
The list names the Escalade EXT only, not the standard Escalade SUV, and names the Avalanche 1500 only, not other Chevrolet models. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The shock absorber, with boots.
Not included: Mounting hardware is not included.









