Overview
The Bilstein 24-186957 is a 5100 Series shock absorber with eye mounts at both ends, designed for the 2007–2013 Chevrolet Silverado 1500 and GMC Sierra 1500. It has a smooth, non-coilover 46mm ID body for lifted trucks, Jeeps and prerunners.
The shock uses a single tube, high gas pressure monotube design for consistent performance and long service life. Its control suits large diameter tires. The body is designed for specific manufacturer lift kits that use the factory O.E.M. mounting configuration.
Key features
- Monotube gas pressure construction
- Self-adjusting deflecting disc valving
- High-flow piston intended to reduce harshness
- Independent rebound and compression tuning
- Larger working piston area for damping control
- Designed for specific manufacturer lift kits using the factory mounting configuration
Eye mounts and lift kit fit
Eye mounts at both ends are simple to install, but the bushing size and hardware need to match. Before fitting, compare the eye diameter and bushing at each end with the shock being removed. A mismatch can cause the shock to bind, wear prematurely or rattle over bumps, so confirm each end before the vehicle is loaded.
Because this shock is designed around factory-style mounting configurations used with certain lift kits, check that your suspension height and mounting points match the kit before you buy. A shock that is too short or too long for the suspension travel can limit articulation. Inspect the shaft and boot regularly for scoring or tears.
- Compare eye sizes at both ends
- Confirm bushings and hardware match
- Check suspension height against the kit
- Inspect the shaft for scoring
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-186957 |
| UPC | 651860591476 |
| Shock series | 5100 Series |
| Fitment type | Direct fit |
| Collapsed length | 16.53 in |
| Extended length | 25.39 in |
| Travel length | 8.86 in |
| Lower mount | Eye 14.12mm |
| Upper mount | Eye 14.12mm |
| Shaft diameter | 11mm |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Monotube |
| Reservoir | No |
| Gas charge | Gas charged |
| Finish | Zinc plated |
| Boot | Included |
Vehicle fitment
The manufacturer fitment list names 2007–2013 Chevrolet Silverado 1500 (Hybrid, LS, LT, LTZ, WT, XFE) and 2007–2013 GMC Sierra 1500 (Hybrid, SL, SLE, SLT, WT, XFE).
The 2500 HD and 3500 models, Suburban, Tahoe and Yukon are not in this list, and no model year outside 2007 through 2013 is covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this shock is designed for specific manufacturer lift kits, confirm that your lift kit or factory suspension matches the mounting configuration before installing. Check alignment after any change in suspension height.
What’s included
One Bilstein 5100 Series shock absorber, part 24-186957, with the boot included. Not included: a manufacturer lift kit, which this shock is designed to work with.









