Overview
The Bilstein 24-188296 is a front 4600 Series monotube gas shock absorber with a 2 in. body diameter, built for classic Land Rover models. It fits the Land Rover Defender, Discovery and Range Rover families from 1970 through 1999.
The gas pressure design moves heat from the oil out through the shock body. A dividing piston gives the oil room to expand as the shock warms, which limits foaming and loss of viscosity. The extrusion process keeps wall thickness consistent, and the piston head lets compression and rebound be tuned separately.
Key features
- Gas pressure monotube body with a 2 in. body diameter.
- Boots are included with the shock.
- Dividing piston that lets the oil expand as heat builds.
- Seamless tube formed by a special extrusion method for consistent wall thickness.
- Piston head that allows separate compression and rebound damping tuning.
- Heavy duty 4600 Series construction for the front position.
Before you buy
A shock absorber controls how quickly the suspension compresses and rebounds after each bump. On a Land Rover with a live front axle, the shock works alongside the springs and axle to keep the tires in contact with the ground, so a worn unit shows up as wallowing, bouncing after dips, or a loose feel on washboard surfaces.
When choosing a replacement, match the position, body size and mounting style to the shock you are removing. Front shocks on these older models are often replaced in pairs, so both sides should be changed together to keep damping even from side to side and to avoid pulling the steering to one side.
- Check the eye and stud mounts for wear before fitting
- Replace worn bushings and hardware at the same time
- Keep the gas body away from heat during removal
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-188296 |
| UPC | 651860449593 |
| Shock series | 4600 Series |
| Type | Monotube, gas charged |
| Body diameter | 2 in. |
| Position | Front |
| Reservoir | No |
| Boots included | Yes |
| Finish | Yellow |
| Fitment type | Direct fit |
| Lift height | 0 in. lift/drop. |
Vehicle fitment
The manufacturer fitment list covers the 1993 Land Rover Defender 110 (Base), the 1994–1995 and 1997 Defender 90 (Base, LE), the 1994–1999 Discovery (50th Anniversary Edition, Base, LE, LSE, SD, SE, SE7, XD), the 1970–1974 and 1987–1994 Range Rover (40th Anniversary Edition, Base, County, County SE, Great Divide, Hunter, LSE) and the 1993 Range Rover Sport.
Defender 90 model years 1996 and 1998 are not on the list, and neither are later Discovery models or Range Rover generations outside the years shown. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is gas charged, so its body is pressurized. Avoid heating, cutting or puncturing it during removal and fitting, and compare boots and mounting points with the original shock first.
What’s included
One front gas charged shock absorber with boots included. Check what mounting hardware and bushings your installation needs before fitting.









