Overview
The Bilstein 4600 Series rear shock absorber, part number 24-186179, is a gas-charged monotube damper for the 2004–2012 Chevrolet Colorado and 2004–2012 GMC Canyon. It is a rear-position unit with a 2 in body, a yellow finish and boots included. Position matters: this is the rear unit, so compare it against the front 4600 part before choosing.
Heat travels from the oil through the body to the outer surface, which supports efficient dissipation compared with a conventional twin-tube arrangement. A dividing piston gives the oil room to expand as it warms, helping avoid foaming and thinning so full damping stays available in hot conditions. The seamless tube is extruded to tight tolerance, which adds strength and supports long service life. Match the position to your truck before choosing this rear unit.
Key features
- Rear-position gas-charged monotube shock
- Heat carried through the monotube body to the outer surface
- Dividing piston that absorbs oil expansion as temperatures climb
- Compression and rebound damping tuned independently by the piston head
- Extrusion-formed tube with consistent wall thickness
- Fewer parts than many conventional twin-tube designs.
- Yellow finish and included boots
Rear shock service and lifespan
Rear shocks control the body motion that the springs leave behind, and they govern how quickly the truck settles after a bump. On a Colorado or Canyon used for hauling, the rear unit carries more of the bed load, so inspection matters more on a loaded truck. Look for oil on the body, a bouncy rear end, or uneven tire wear across the rear axle.
Replace rear shocks as a pair so both sides damp the same way, and check the rear bushings and bump stops while the old unit is off. Keep the dust boot intact, since grit on the shaft wears the seal. Confirm the rear position on the new part against the shock you removed before fitting it.
- Replace rear shocks in pairs
- Inspect bump stops and bushings
- Check for oil on the body
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-186179 |
| UPC | 651860582788 |
| Shock series | 4600 Series |
| Position | Rear |
| Type | Monotube |
| Charge | Gas charged |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | No |
| Boots | Included |
| Fitment type | Direct fit |
| Lift/drop | 0 in. |
Vehicle fitment
Fits 2004–2012 Chevrolet Colorado (Base, LS, LT, WT, Z71, Z71 LS, Z85, Z85 LS) and 2004–2012 GMC Canyon (SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE) as a direct fit. Years beyond 2004–2012, including newer Colorado and Canyon generations, are not covered.
Model years beyond 2004–2012, including newer Colorado and Canyon generations, are not part of this coverage.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Boots are included with the rear shock absorber.
Not included: mounting hardware for this rear unit; check the package contents before fitting.









