Overview
The Bilstein B8 5100 Series Ride Height Adjustable Shock Absorber is a front shock for the 2000 to 2006 Toyota Tundra. Bilstein designs it for trucks and SUVs with a front OE coilover style suspension. Its snap-ring grooves let you change the spring seat position.
It is a monotube shock with a 46mm digressive piston and a self-adjusting deflective disc valve setting. It offers increased wheel travel and improved handling. The adjustable ride height gives an easy way to level the vehicle.
Key features
- Ride height adjustable, with 0 to 2.75 in. of front lift depending on application
- Multiple snap-ring grooves in the body for different spring seat positions
- Monotube design with a 46mm digressive piston
- Self-adjusting deflective disc valve setting
- Zinc plated finish
- Boot included
Coilover basics
A coilover shock combines the damper with a spring that rides on an adjustable seat. On this style, the spring seat position sets the ride height, so changing it affects the front lift and the load the shock carries. Moving the seat changes how much the spring is compressed, which changes how the front of the vehicle sits at rest.
Front shocks on trucks and SUVs work hardest on rough ground and under braking, so their condition affects steering control as much as comfort. Monotube designs keep oil and gas in one tube, which supports steady damping during repeated use. New shocks paired with worn bushings or springs may not deliver the expected result.
- Confirm the spring seat groove before final tightening
- Replace shocks in pairs on the same axle
- Check mounts for cracked rubber or loose studs
- Inspect the boot for tears that let grit in
Specifications
| Brand | Bilstein |
|---|---|
| UPC | 651860783765 |
| Series | B8 5100 ride height adjustable |
| Position | Front |
| Body design | 46mm ID snap ring grooved body (coilover) |
| Internal design | Monotube |
| Piston | 46mm digressive |
| Valve setting | Self-adjusting deflective disc |
| Front lift | 0 to 2.75 in., depending on application |
| Collapsed length | 13.23 in. |
| Extended length | 18.35 in. |
| Travel length | 5.12 in. |
| Lower mount | Eye |
| Upper mount | Stud |
| Finish | Zinc plated |
| Reservoir | No |
| Boot | Included |
| Fitment | Direct fit |
Vehicle fitment
It is a fit for the 2000 to 2006 Toyota Tundra, and no other models, trims or axles are covered.
Years outside 2000 to 2006 fall outside this fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Choosing a snap-ring groove sets the spring seat position, which affects the front lift, so confirm the groove for your application before installing. The shock uses an eye lower mount and a stud upper mount. Because this is a coilover style design with a spring under load, support the vehicle and the suspension safely during installation.
What’s included
The boot is included. Check the springs, hardware and spring seats against your installation before installing.









