Overview
The Bilstein 4600 Series front shock, part number BIL24-184601, is a gas charged monotube shock with a 2 inch body diameter, boots included and a yellow finish. It is a direct fit for the 1984 to 1985 Toyota 4Runner in DLX and SR5 trim, and for the 1979 to 1985 Toyota Pickup in Base, DLX, DLX Turbo and SR5 trim.
The monotube gas pressure design has no external reservoir. Heat from the oil is carried out through the outer surface of the body, so the shock sheds heat more efficiently and keeps working as it warms.
A dividing piston inside the tube lets the oil expand as it heats, which stops foaming and loss of viscosity. This keeps the full damping force available at high temperatures, and the piston head is built so compression and rebound can be tuned separately.
The tube is formed by a special extrusion method that gives a tight peak-to-valley tolerance and consistent wall thickness. The seamless monotube provides both tube strength and heat dissipation, which supports a longer service life.
Key features
- Front position
- Gas charged monotube design
- 2 inch body diameter
- Boots included
- No external reservoir
- Yellow finish
- Dividing piston and separate compression and rebound tuning
Older truck front suspension
On older trucks the front shocks often work hard because the steering linkage and springs have aged along with the body. A front shock that has lost damping lets the front end bounce over washboard and can make the steering feel vague at highway speed. Keeping the shocks in good shape supports tire contact and steering control.
Installation is easier when the mounting points are clean and the shock’s eyelets and bushings are in good condition. Check the boots before fitting, since a torn boot lets grit reach the rod seal. Front shocks are usually replaced in pairs so both sides control the suspension in the same way.
- Inspect the steering box and linkage for play
- Check front tire wear patterns
- Replace bushings that show cracking
Specifications
| Brand | Bilstein |
|---|---|
| Part number | BIL24-184601 |
| Shock series | 4600 Series |
| Position | Front |
| Shock type | Monotube, gas charged |
| Body diameter | 2 inch |
| Reservoir | None |
| Boots | Included |
| Finish | Yellow |
| Fitment | Direct fit |
Vehicle fitment
It fits 1984–1985 Toyota 4Runner models in DLX and SR5 trim, and 1979–1985 Toyota Pickup models in Base, DLX, DLX Turbo and SR5 trim.
The list does not include the Toyota 4Runner or Pickup from other years, the Tacoma, or the T100. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Front shocks are generally fitted in pairs. Check the length and mounts against the front springs and the steering components before installing.
What’s included
The product is one front monotube shock with boots, under part number BIL24-184601.









