Overview
The Bilstein 33-256764 is a B8 5100 Series rear shock absorber for the 2014 Ford F-150, rated for lifted trucks and SUVs at up to a 1 in. lift. It is a monotube, non-coilover shock with a 46mm smooth body and a zinc plated finish.
The B8 5100 is a direct fit option for lifted trucks, with a velocity sensitive, digressive piston that responds to changing road conditions. Each shock is tuned for its specific application. Collapsed length is 17.52 in, extended length 28.74 in and travel 11.22 in, which are useful when comparing against the shock you remove. The boot is included and there is no reservoir.
Key features
- Velocity sensitive, digressive piston
- Monotube design that Bilstein credits with consistent damping
- Direct fit for lifted trucks and SUVs, rated w/0-1 in. lift
- 46mm ID smooth body, non-coilover
- Zinc plated finish
- Boot included
Lift height and ride height
Ride height affects how a shock works. A shock sized for a lifted truck extends and compresses differently from one used on a stock height truck, so the height rating matters for travel and control. Before buying, measure the current shock’s collapsed and extended lengths and compare them with the new unit, since a mismatch can limit suspension movement.
Watch the rear end after the swap. Uneven height from side to side, rubbing at the tire or clunking on rough roads can point to a fit or height issue. Lift components such as blocks or springs also change how a shock is loaded, so review the full suspension setup before settling on a final ride height.
- Measure the old shock before ordering
- Look for rubbing at full compression
- Recheck ride height after the first drive
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-256764 |
| UPC | 651860824321 |
| Product line | B8 5100 Series |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | w/0-1 in. Lift |
| Collapsed length | 17.52 in |
| Extended length | 28.74 in |
| Travel length | 11.22 in |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Mono tube |
| Reservoir | No |
| Finish | Zinc plated |
| Boot | Included |
Vehicle fitment
The manufacturer fitment list names the 2014 Ford F-150 in the FX2, FX4, King Ranch, Lariat, Limited, Platinum, STX, XL and XLT trims.
Other model years need a separate check of year, model and trim before ordering.
Installation notes
Bilstein positions this model for lifted trucks with a lift rating of w/0-1 in., so a taller lift falls outside the stated range. Measure the collapsed and extended lengths against the shock you are replacing before fitting the new one, since those are the only length figures given.
What’s included
One B8 5100 Series rear shock absorber with its boot.









