Overview
The Bilstein 5160 Series Reservoir Shock Absorber (part number 25-177435) is a gas-charged reservoir shock for pickups and SUVs. It installs in the stock shock mounting location with no cutting or welding, and its remote reservoir adds shock oil capacity for heat dissipation and damping sensitivity.
The shock is a mono tube design with a 46mm smooth body (non-coilover), a 14mm shaft and a zinc plated finish. Its lift height is 4 to 6 in., and the reservoir mounting configuration is designed for each vehicle application. Vehicle-specific fitment is not confirmed for this part number, so check the application before installing.
Key features
- Installs in the stock shock mounting location on pickups and SUVs, with no cutting or welding required
- Remote reservoir increases shock oil capacity for greater heat dissipation and damping sensitivity
- Floating dividing piston sits in the reservoir, which Bilstein says allows increased wheel travel and more shaft movement
- Digressive valving system provides full damping capability immediately
- Mono tube design, which Bilstein describes as industry leading
- Triple-C Technology finish, which Bilstein says provides easy care and lasting good looks
Choosing a shock for a lift
Lift height changes the shock’s working range, so a shock suited to one range may not suit another. Compare the collapsed and extended lengths to the new ride height before buying, and confirm the shaft will not bottom out at full compression. A shock that is too short can reduce travel and cause harsh rebound.
Direct fit shocks depend on the mounting locations of the original vehicle, so verifying the stem and eye sizes against your current parts is a sensible first step. Many owners replace shocks alongside springs, control arms and bushings when lifting, because those parts share the load. Keep the gas charge in mind, since pressurized shocks should not be cut or heated.
- Compare lengths to the new ride height
- Check the eye size against your bracket
- Replace bushings along with the shock
- Recheck ride height after the first drives
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 25-177435 |
| UPC | 651860803418 |
| Shock series | 5160 Series |
| Position | Front |
| Fitment type | Direct Fit |
| Internal design | Mono tube |
| Body design | 46mm ID smooth body (non-coilover) |
| Shaft diameter | 14mm |
| Lower mount | Eye 12.1mm |
| Upper mount | Stem |
| Collapsed length | 15.59 in. |
| Extended length | 26.61 in. |
| Travel length | 11.02 in. |
| Lift height | w/4 – 6 in. Lift |
| Hydraulic / gas charged | Gas charged |
| Reservoir | Yes |
| Finish | Zinc plated |
| Boot included | No |
| Mounting parts included | Upper mount kit and reservoir mount kit |
Vehicle fitment
No vehicle year, make, model or chassis is confirmed for part number 25-177435. It is a direct fit for pickups and SUVs with a 4 – 6 in. lift. Confirm the application against your truck before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock installs in the stock shock mounting location with no cutting or welding. The upper mount kit and reservoir mount kit are included, and detailed instructions come in the box. Follow them for reservoir placement, which is specific to each vehicle application.
What’s included
The shock comes with the upper mount kit, the reservoir mount kit and detailed instructions.
Not included: The boot is not included.









