Select your vehicle

Bilstein 5100 Series Shock Absorber – 24-293082

Bilstein

$115.95In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 4:20 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear ride height adjustable shock for 2007–2013 Chevrolet Silverado 1500 and GMC Sierra 1500
  • Rear lifted height up to 1 in
  • Collapsed length 16.53 in, extended length 25.39 in
  • Zinc-plated 46mm smooth body

Description

Overview

The Bilstein 5100 Series 24-293082 is a rear shock absorber for the 2007–2013 Chevrolet Silverado 1500 and the 2007–2013 GMC Sierra 1500. It is a direct-fit upgrade for a rear lift of up to 1 inch.

The shock has a 46mm zinc-plated smooth body and a monotube design. Its collapsed length is 16.53 inches and its extended length is 25.39 inches. The piston is digressive, and each shock is tuned for its application so the damping suits a lifted pickup.

Key features

  • Rear lifted height up to 1 in
  • Zinc-plated 46mm smooth body
  • Monotube design with a digressive piston
  • Collapsed length 16.53 in and extended length 25.39 in

Damping on a lifted pickup

Rear shocks do more work on a lifted pickup than on a stock truck. Raising the rear changes the angle of the springs and the length the damper must cover, so the shock sees different loads on washboard roads, during braking and when the bed is loaded. A damper matched to the lift keeps the rear tires in contact with the ground and limits the bounce that can make a half-ton feel loose at highway speed.

When choosing a rear shock for a lifted Silverado or Sierra, compare the collapsed and extended lengths with the unit you are removing before ordering. Rear lift kits often come with new springs or spacers, and a shock that is too short can bottom out or strain its mounts. Worn bushings, leaking fluid and a rear end that keeps bouncing after bumps are common signs the old unit needs replacing. Shocks are normally replaced in pairs so both sides damp the same way.

Specifications

Brand Bilstein
Part number 24-293082
Shock series 5100 Series
Position Rear
Rear lifted height Up to 1 in
Collapsed length 16.53 in
Extended length 25.39 in
Finish Zinc plated
Fitment type Direct fit

Vehicle fitment

It fits the 2007 through 2013 Chevrolet Silverado 1500 and the 2007 through 2013 GMC Sierra 1500, in the same model years for both trucks.

Silverado and Sierra 1500 models from 2014 onward, the 2500 and 3500 trucks, and the Silverado Classic are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One rear shock absorber.

Fitment

VehicleYearsTrims
Chevrolet Silverado 15002007–2013Hybrid, LS, LT, LTZ, WT, XFE
GMC Sierra 15002007–2013Denali, Hybrid, SL, SLE, SLT, WT, XFE

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Bilstein 24-293082 fit a 2010 GMC Sierra 1500?

Yes. It fits the 2007 to 2013 GMC Sierra 1500, so a 2010 model is covered. Confirm the rear lift you run is no more than 1 inch.

How much rear lift does this shock handle?

Up to 1 inch of rear lifted height is listed. A shock sized for a larger rear lift would need a different part number from the 5100 range.

Is this shock for the front or rear of the truck?

It is a rear shock, as the listed position shows. Front shocks in the same range are sold under separate part numbers.

How do I tell if a rear shock needs replacing?

Look for oil leaking down the shock body, a rear end that keeps bouncing after a bump, uneven tire wear, or clunking at the mounts. Replacing shocks in pairs keeps the rear damping even from side to side.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon