Overview
The Bilstein 4600 Series rear shock absorber, part number 24-186834, is a gas charged monotube shock for the 2007–2014 Chevrolet Suburban 1500 and the 2007–2014 GMC Yukon XL 1500. It is a direct-fit replacement with 0 in of lift or drop, so it keeps the original ride height rather than raising or lowering the vehicle.
A monotube shock uses a single pressure tube with a piston inside, instead of the two-tube layout found on many conventional shocks. In this Bilstein design a dividing piston lets the damping oil expand as it heats, which Bilstein says helps the shock keep its full damping as temperatures rise. The body is 2 in in diameter, the finish is yellow and the unit has no reservoir. It suits owners of these full-size SUVs who need a rear replacement with a monotube body.
Key features
- Gas charged monotube body with a dividing piston that gives the oil room to expand as the shock heats
- Seamless monotube tube made with a special extrusion process, which Bilstein says gives a tight peak-to-valley tolerance and consistent wall thickness
- Piston head lets compression and rebound damping be tuned independently for ride comfort
- Bilstein describes fewer parts than most conventional twin tube and road sensing shock designs
- Boots included
Keeping a monotube shock cool
Shocks warm up during long drives, rough roads and repeated trail use, and heat can change how the oil flows through the valving. A monotube body with a dividing piston gives the oil room to expand, which helps keep damping steady as temperatures rise. Good airflow around the body and clean brackets also help the shock shed heat.
On full-size SUVs, the rear shocks carry load from passengers and cargo, so inspect them after heavy towing or hauling. Check the boot for tears, look for oil on the body and make sure the mounts sit square before tightening. Pressurized shocks should be handled with care, and the body should never be struck or scored.
- Check the boot for splits
- Look for oil on the tube
- Keep the body free of scratches
- Tighten mounts square and snug
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-186834 |
| UPC | 651860592763 |
| Series | 4600 Series |
| Position | Rear |
| Type | Monotube, gas charged |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | No |
| Boots included | Yes |
| Lift/drop | 0 in |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2007–2014 Chevrolet Suburban 1500 in LS, LT, LTZ and Z71 trims, and the 2007–2014 GMC Yukon XL 1500 in SLE and SLT trims.
The list does not include the standard GMC Yukon, the Chevrolet Tahoe, or the 2007–2013 Silverado and Sierra 1500 pickups. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this shock is pressurized, leave the body undamaged and wear eye protection when you take the old unit off.
What’s included
No









