Overview
The Bilstein 24-187213 is a 5100 Series front shock absorber for Dodge Ram trucks, listed across the 1500, 2500 and 3500 lines with model years from 1994 to 2013 overall. It is listed with a w/6 to 8 in lift range and has an eye lower mount at 14.12mm, a stem upper mount and a 14mm shaft.
This 46mm ID smooth, non-coilover shock has 19.57 in collapsed and 30.31 in extended lengths, giving 10.74 in of travel. Its monotube design uses high gas pressure, and it suits Dodge Ram trucks in the 1500, 2500 and 3500 lines.
Key features
- Monotube design with high gas pressure
- Self-adjusting deflecting disc valving
- High-flow piston intended to reduce harshness
- Independent rebound and compression tuning
- Larger working piston area for damping control
- Designed for specific manufacturer lift kits using the factory mounting configuration
Ram truck front end wear
Full-size Ram trucks carry a heavy front axle, and the front shocks absorb much of the movement from road joints, potholes and off-road ruts. Over time the damping fades and the front end can start to bounce or wander. A worn front shock often shows up first as uneven tire wear along the inner or outer edge of the tread.
When replacing front shocks on a Ram, check the stem mount and the condition of the front bushings at the same time. A higher ride height changes the angles the shock works through, so the front alignment and the driveline angles should be checked after the work is done. Keeping the front end aligned helps the new shock perform as intended.
- Look for leaks on the shock body
- Check the stem mount for cracks
- Inspect tire wear across the tread
- Verify alignment after installation
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-187213 |
| UPC | 651860608518 |
| Shock series | 5100 Series |
| Position | Front |
| Fitment type | Direct fit |
| Lift range | w/6 to 8 in lift |
| Collapsed length | 19.57 in |
| Extended length | 30.31 in |
| Travel length | 10.74 in |
| Lower mount | Eye 14.12mm |
| Upper mount | Stem |
| Shaft diameter | 14mm |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Monotube |
| Reservoir | No |
| Gas charge | Gas charged |
| Finish | Zinc plated |
| Boot | Included |
Vehicle fitment
It fits 2006–2008 Dodge Ram 1500 (Laramie, SLT, SXT), 1994–2010 Dodge Ram 2500 and 3500 in several trims, and 2011–2013 Ram 2500 and 2011–2012 Ram 3500, with trims such as Laramie, SLT and ST.
Ram 1500 models outside 2006 through 2008 and Ram 3500 models from 2013 onward are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the lift range is w/6 to 8 in, check front alignment and driveline angles after installation, and confirm your lift kit uses the factory mounting configuration this shock is designed for.
What’s included
One Bilstein 5100 Series front shock absorber, part 24-187213, with the boot included. Not included: no lift kit or mounting hardware is listed with this shock.









