Select your vehicle

Bilstein 4600 Series Shock Absorber – 24-023399

Bilstein

$139.79In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 1:40 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Direct fit for the 1997–2001 Honda CR-V (EX, LX, SE)
  • 4600 Series monotube, gas charged, 2 in body diameter
  • Boots included, no reservoir
  • Part number 24-023399, UPC 651860406220

Description

Overview

The Bilstein 24-023399 is a 4600 Series monotube gas charged shock absorber for the 1997–2001 Honda CR-V in the EX, LX and SE trims. It is a direct fit with a 2 in body diameter, a yellow finish and boots included, and it has no reservoir.

The shock uses Bilstein’s patented monotube body. Heat that builds in the oil moves to the outer surface of the body and dissipates there, which helps the damping hold steady over long stretches of driving. A dividing piston lets the oil expand as it warms, so the fluid resists foaming and keeps its viscosity. The tube is made with a special extrusion method that gives a tight peak-to-valley tolerance and consistent wall thickness, and the seamless construction is intended to resist strain and extend service life. Compression and rebound damping can be tuned independently in the piston head, which Bilstein describes as a comfort and performance benefit with fewer parts than twin tube designs.

Key features

  • Patented monotube body with gas charged design
  • 2 in body diameter in the 4600 Series
  • Dividing piston lets the oil expand without aerating
  • Extruded seamless tube with tight wall tolerances
  • Separate compression and rebound damping adjustment in the piston head
  • Boots included, no reservoir

Choosing a replacement shock

The rear shocks on a small SUV like the CR-V control body motion over bumps, during cornering and under braking. A shock that has lost damping lets the body bounce, which can affect tire contact and stopping distance. Because the oil inside a monotube warms with use, a shock that stays cool and keeps its gas charge will hold damping better over long drives.

When choosing a replacement, compare the body diameter, mounting style and overall length with the unit coming off. Rear shocks are commonly changed alongside bushings, mounts and springs, since worn parts can limit how well a new shock performs. Check the mounting hardware and boots for cracks before installing. A shock with a separate reservoir would not be interchangeable with this monotube design.

Specifications

Brand Bilstein
Part number 24-023399
UPC 651860406220
Shock series 4600 Series
Shock type Monotube, gas charged
Body diameter 2 in
Finish Yellow
Reservoir No
Boots included Yes
Fitment type Direct fit

Vehicle fitment

It is a direct fit for the 1997–2001 Honda CR-V in the EX, LX and SE trims.

Model years after 2001 are not covered, and other Honda models are not included. Confirm fit for your vehicle’s year, model and trim before ordering.

What’s included

One shock absorber with boots. No reservoir and no mounting hardware are part of this part number.

SKU: BIL24-023399 Category:

Specification

Shipping weight 6.10 lbs
Package dimensions 26.80 × 3.60 × 3.60 in
brands

Fitment

VehicleYearsTrims
Honda CR-V1997–2001EX, LX, SE

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which vehicle does the Bilstein 24-023399 fit?

The manufacturer fitment list names the 1997–2001 Honda CR-V in the EX, LX and SE trims. Model years after 2001 are not on the list, so confirm your year and trim before deciding whether this shock suits your vehicle.

Does this 4600 Series shock have a reservoir?

No. It has no reservoir, which matches its monotube design. The shock has a 2 in body diameter and a yellow finish, and boots come with it.

What does the monotube design in this Bilstein shock do?

A monotube uses one pressure tube with a dividing piston. The piston lets the oil expand as heat builds, and the gas charged body carries heat to the outer surface, which helps damping stay steady on long drives.

Should both rear shocks be replaced together?

Usually yes. Replacing both rear shocks keeps damping even from side to side, which helps the vehicle track straight and stay balanced under braking. If only one shock is worn, the new unit may feel firmer than the old one until the other side is replaced.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon