Overview
The Bilstein 5100 Series 24-285698 is a rear shock absorber for 4WD Ram 2500 trucks from 2014 to 2026. It is built for a 4 inch rear lift and is sold individually as a monotube shock kit.
The shock has a 46mm zinc-plated smooth body. Its collapsed length is 18.66 inches and its extended length is 28.24 inches. It is a monotube design with a gas-charged unit, and the digressive piston is tuned for the application like the other shocks in the 5100 range.
Key features
- Rear lift of 4 in
- 4WD trucks only
- Zinc-plated 46mm smooth body
- Collapsed length 18.66 in and extended length 28.24 in
- Monotube shock kit with a gas-charged design
Four-wheel-drive lift planning
A four-wheel-drive Ram 2500 with a rear lift has a longer stroke demand on its rear shocks, especially when towing or carrying heavy loads. A longer shock gives the suspension room to work, but the mounts and driveline must also be correct for the new height. Planning the lift as a complete setup is more reliable than changing one part on its own.
Check the rear driveline angles and the position of the rear bump stops once the shock is installed. Long shocks can rub against brackets or the frame if the mounts are not clean and tight. Look for oil on the shock body and listen for knocking after the first few trips.
- Measure the old shock at both mounts
- Check driveline angles after the lift is set
- Inspect rear bump stops for cracks
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-285698 |
| Shock series | 5100 Series |
| Position | Rear |
| Drive type | 4WD only |
| Rear lift | 4 in |
| Body diameter | 46mm |
| Collapsed length | 18.66 in |
| Extended length | 28.24 in |
| Shock type | Monotube shock kit, gas-charged |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2014 through 2026 Ram 2500 in 4WD form with a 4 inch rear lift.
Two-wheel-drive Ram 2500 trucks and Ram 2500 models outside the 2014 to 2026 years are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Part 24-285698: one rear shock absorber, sold individually.
Installation notes
Check that the truck is 4WD and carries the 4 inch rear lift before fitting. Compare the 18.66 inch collapsed length with the old shock at both mounts.









