Overview
The Bilstein BIL22-278555 is a front left B6 Series suspension strut for the 2013 and 2014 Subaru Outback. It fits the 2.5i, 2.5i Limited, 2.5i Premium, 3.6R and 3.6R Limited models, and those are the only Outback models covered by this strut.
It is an OE upgrade with OEM top and bottom mounts, so the mounting points match the original part. The coil spring is not included with the strut. It is sold as a single front left unit, so the right front strut is a separate purchase.
Key features
- OE upgrade replacement for the front left position
- Gas-charged monotube design
- It provides higher power reserves for heavy loads and towing.
- It is designed to improve grip and lane stability in everyday and extreme driving.
- Its gas-pressure technology is designed to improve traction and handling.
- Designed to work with the series spring
Strut and spring pairing
A strut combines the damper and the spring seat into one assembly, so it carries part of the front suspension load and sets the ride height at that corner. When a new strut is installed, the existing coil spring should be checked for fatigue and for correct seating on the new spring seat. A spring that has sagged can change the ride height and the feel of the steering.
Replacing one strut without the other can leave the two front corners behaving differently, which may affect braking and steering response. Top mounts and bearings should be checked for wear at the same time, since a worn mount can cause clunks or uneven tire wear. Bushings at the lower control arms and sway bar links also deserve a look during a front end job.
- Check coil spring for sag and seating
- Inspect top mounts and bearings for wear
- Compare both front corners after the install
Specifications
| Brand | Bilstein |
|---|---|
| Part number | BIL22-278555 |
| Series | B6 Series |
| Position | Front left |
| Shock type | Monotube shock kit |
| Charge | Gas charged |
| Top mount | OEM |
| Bottom mount | OEM |
| Body diameter | OEM |
| Finish | Yellow paint |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2013–2014 Subaru Outback in 2.5i, 2.5i Limited, 2.5i Premium, 3.6R and 3.6R Limited models.
It fits 2013 and 2014 Outback models only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the existing coil spring sits correctly on the strut’s spring seat before fitting, because the spring is not supplied. A strut carries part of the front suspension load and links to the steering knuckle at its lower end, so the top mount, bottom mount and spring seat should all match the original strut. Front struts are often replaced in pairs when both sides are worn, so both corners respond the same way. Work on a securely supported vehicle.
What’s included
One front left strut assembly. The coil spring is not included.










