Overview
The Bilstein B6 Series 24-010252 is a front shock absorber for the 1971–1995 Chevrolet G10, G20 and G30 vans and the 1975–1978 GMC G15 van. It is a monotube design with an eyelet top mount and a yellow paint finish, sold individually.
The B6 line uses a velocity sensitive digressive piston that adjusts damping as road conditions change. The design supports steady, fade-free performance and a noticeable gain in ride quality, handling and comfort. Each shock is tuned for its specific application.
The short details note that the shock is used with a long tie rod end on the outer side and a short tie rod end on the inner side. Check the tie rod arrangement on your van before fitting, since this is part of how the unit is installed.
Key features
- Front position
- Monotube design
- Eyelet top mount
- Velocity sensitive digressive piston
- Yellow paint finish
Choosing shocks for a G-series van
Front shocks on full-size vans work hard. The vehicle carries heavy bodies and cargo, and the front end sees constant braking and steering loads. A shock that holds damping steady as it heats helps keep the front tires in contact with the road on long grades and rough secondary roads. When the old shock leaks, feels soft over bumps, or lets the front end bounce several times after a dip, it is time to inspect it.
Front shocks are usually replaced in pairs so both sides damp the same way. Check the upper bushings and lower mount for cracks, and look for oil seeping down the body. Worn steering components, such as ball joints and tie rod ends, can make a new shock wear unevenly, so inspect them at the same time. Torque the mounting hardware to the value your vehicle requires after the first few drives.
- Oil seeping down the shock body
- Bouncing that continues after a dip
- Cracked upper bushings or lower mount
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-010252 |
| Shock series | B6 Series |
| Position | Front |
| Shock type | Monotube |
| Top mount | Eyelet |
| Finish | Yellow paint |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 1971 through 1995 Chevrolet G10, the 1971 through 1995 Chevrolet G20 and G30 vans, and the 1975 through 1978 GMC G15 van.
Chevrolet and GMC vans from outside those years, and vans outside the model range above, are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
Part 24-010252: one front shock absorber, sold individually.
Installation notes
The long tie rod end goes on the outer side and the short tie rod end on the inner side. Check that arrangement on your van before installing the shock.









