Overview
The Bilstein 5100 Ride Height Adjustable 24-292702 is a front shock absorber for the 2015–2022 Chevrolet Colorado and the 2015–2022 GMC Canyon. It is designed for trucks with a front OE coilover-style suspension and gives a front lift of 0 to 2.6 inches, depending on the application.
The zinc-plated body has several snap-ring grooves that let you set the spring seat at different heights. The unit is a monotube gas-pressure design with a digressive piston and a self-adjusting deflective disc valve. Because the front lift comes from the spring seat position, the shock works with the OE springs rather than replacing them.
Setting the seat in the grooves is what lets one shock cover the whole 0 to 2.6 inch range. Pick the groove that matches the lift you want, and keep the factory coil spring in place as the stated lift depends on it.
Key features
- Snap-ring grooved body sets the front lift height
- Front lift height of 0 to 2.6 in
- 46mm zinc-plated monotube body
- Gas-pressure design with a digressive piston
- Self-adjusting deflective disc valve
Choosing a front lift groove
Ride height across a 0 to 2.6 inch range is a trade-off between stance and usable suspension travel. Setting the seat for more lift shortens the shock’s available droop, which can matter on rough trails and steep grades. Start with the lowest groove that gives the look you want, then move up only if the truck still needs more height.
This type of shock works best when the rest of the front end is in good condition. Worn ball joints, tie rods and control arm bushings change how the wheel moves, and fresh shocks will not correct them. Before buying, look over the front end and decide whether the shock or the spring is the part that needs attention.
- Start with the lowest groove that meets your goal
- Check ball joints and tie rods before setting lift
- Match tire size to the new ride height
- Recheck bump stop clearance after setting the seat
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-292702 |
| Shock series | 5100 Series (ride height adjustable) |
| Position | Front |
| Shock type | Coilover, monotube, gas-pressure |
| Body diameter | 46mm |
| Front lift height | 0 to 2.6 in |
| Collapsed length | 14.76 in |
| Extended length | 19.45 in |
| Top mount | OEM |
| Bottom mount | OEM |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2015–2022 Chevrolet Colorado and the 2015–2022 GMC Canyon, covering the full 2015 to 2022 run of both pickups.
Full-size Silverado and Sierra pickups and Colorado models before 2015 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Part 24-292702: one front shock absorber, sold individually.









