Overview
The Belltech 1000SP is a complete lowering kit with street performance shocks for the 2015–2020 Ford F-150. It includes every part needed to lower the truck, including the installation and alignment pieces, so the setup does not have to be assembled from individual components.
The kit uses shackles at the rear and strut rods at the front, and it includes shocks. The components are matched so that the lowering, alignment and performance pieces work together.
Key features
- Complete suspension system in one box
- Rear suspension uses shackles
- Front suspension uses strut rods
- Street performance shocks included
- Installation and alignment pieces included
Street lowering and daily driving
Lowering an F-150 lowers the center of gravity, which usually reduces body roll in corners and gives a more planted feel on pavement. The trade-off is less suspension travel, so the truck will reach the bump stops sooner on rough roads. Street performance shocks are tuned for firmer control at the lower height, which suits daily driving and highway use.
Tire and wheel choice matters once the truck is lowered. Larger tires or wider wheels can rub at full steering lock, and the front alignment is more sensitive to the new geometry. Load capacity and towing should be reviewed with the new height in mind.
- Check tire clearance at full steering lock
- Recheck the front alignment after the first drive
- Inspect the shocks for leaks after a few weeks
- Review towing and payload with the lower stance
Specifications
| Brand | Belltech |
|---|---|
| Part number | BEL1000SP |
| Suspension type | Complete suspension system |
| Front suspension | Strut rods |
| Rear suspension | Shackles |
| Shocks | With shocks |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2015–2020 Ford F-150 in the King Ranch, Lariat, Limited, Platinum, SSV, XL and XLT trims.
The list covers 2015 through 2020 only, so the 2014 and earlier and 2021 and later F-150 are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes all installation and alignment pieces, so a front alignment is part of the job after lowering. Lowering changes the suspension geometry, so have the front alignment checked once the work is done.
What’s included
Strut rods for the front, shackles for the rear, and street performance shocks, along with the installation and alignment pieces that Belltech says are needed for the lowering.









