Overview
The Belltech Street Performance rear lowered shock, part number BEL2216EE, is a rear shock for lowered Ford F-150 trucks. It is engineered for a premium ride with control of pitch, roll, dive and squat in a lowered vehicle.
Low speed compression tuning focuses on controlling body movement in a sport truck or SUV, which helps the driver stay confident and in control. Progressive rebound tuning keeps the ride smooth but firm when large aftermarket wheels are fitted.
It fits 2004 to 2013 F-150 2WD and 4WD models and the 2004 F-150 Heritage. The SVT Raptor is not among the years covered below, so confirm its fit before ordering for a Raptor.
Key features
- Metal dust boots
- Hardened chrome 15 mm piston rods
- Triple lip NBR rod seal
- Teflon guide bushing
- 35 mm pistons with low friction Teflon seals
- 51 mm wide body for increased oil volume
- OEM quality rubber bushings
- Progressive rebound tuning
Lowered F-150 ride and wheel fit
An F-150 that is lowered at the rear changes the way the leaf or coil springs load, and the new shock must control that movement without harshness. The tuning of the low speed compression decides how the body responds to braking and cornering, while the rebound setting governs how quickly the spring returns after a bump. Check the new shock’s range of motion through a few turns and over bumps before trusting it on the road.
Larger wheels and tires add rotating mass and can rub the fender or the shock body when the suspension compresses, so measure clearance with the truck fully loaded. Inspect the upper mount and bushings during the install, because worn rubber shifts the shock angle. Check the shock again after the first few drives to confirm the bolts are still at specification.
- Measure wheel and fender clearance under load
- Inspect upper mounts and bushings
- Re-check fasteners after the first drives
Specifications
| Brand | Belltech |
|---|---|
| Part number | BEL2216EE |
| Position | Rear |
| Piston rod | Hardened chrome, 15 mm |
| Piston | 35 mm with Teflon seals |
| Body | 51 mm wide body |
| Dust boots | Metal |
| Rebound tuning | Progressive |
| Fitment | Direct fit |
Vehicle fitment
It fits 2004–2014 Ford F-150 models, including the FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, STX, XL and XLT trims, and the 2004 F-150 Heritage in XL and XLT trim.
Coverage runs from 2004 to 2014 for F-150 models, with 2004 to 2013 for 2WD and 4WD trucks. Confirm your year, model and trim before ordering.
Installation notes
Because the shock is for a lowered F-150, check the rear shock length and mounts against your drop before installing. Large aftermarket wheels are a factor, so confirm wheel and tire clearance with the lowered shock in place.
What’s included
The product is one rear shock absorber under part number BEL2216EE, with the dust boots and rubber bushings fitted.









