Overview
The Baer Brakes 6800127 is a caliper rebuild kit for the S4 (1.625 inch) caliper, and it services one caliper per kit. It supplies the seals, abutment clips and bleeder caps used when rebuilding this caliper type, and it comes as a kit.
The O-ring seals are EPDM rubber with a square rim shape. The kit includes stainless steel brake pad abutment clips.
Key features
- EPDM rubber pressure and weather seals.
- Stainless steel brake pad abutment clips.
- Services one caliper.
- Square rim O-ring seals with a 1.625 inch inside diameter.
- Bleeder screw dust caps included.
Rebuild tips for calipers
A caliper rebuild replaces the seals that keep fluid under pressure and keep dirt out. Piston and bore surfaces should be cleaned and checked for pitting or scoring before the new seals go in, since a damaged bore can leak even with new seals. Lubricate seals with the brake fluid type your system uses, and avoid petroleum-based grease.
Pad abutment clips take wear and heat, so replace them with the pads rather than reusing worn clips. Check the slide pins and boots for tears, and clean the bracket surfaces where the pads sit. Bleed the system after reassembly, and make sure the piston moves freely before installing the wheel.
- Inspect the piston bore for scoring
- Use fresh fluid when bleeding
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6800127 |
| UPC | 90127960219 |
| Caliper type | S4 (1.625 inch) |
| Services | 1 caliper |
| O-ring inside diameter | 1.625 inch |
| O-ring material | EPDM rubber |
| O-ring rim shape | Square |
| Seal type | O-ring |
| Weather seals | 4 |
| Pressure seals | 4 |
| Pad abutment clips | 4, stainless steel |
| Bleeder caps | 2 |
| Bleeder screw included | No |
| Pack format | Kit |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
The kit is for the S4 (1.625 inch) caliper, so confirm the caliper type on your vehicle before using it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only bleeder caps are supplied, so the bleeder screw must come from your existing caliper. The pad abutment clips are included, so install the new clips with the pads. Because this kit works on hydraulic brake parts, bleed the system and test the pedal before driving.
What’s included
The kit includes 4 weather seals, 4 pressure seals, 4 abutment clips and 2 bleeder caps, for servicing one caliper.
Not included: bleeder screw.












