Overview
The Power Stop Performance Brake Calipers S6232 (part number PSTS6232) are remanufactured front brake calipers for the 2009–2013 INFINITI FX50 and the 2014 INFINITI QX70.
Power Stop Performance Brake Calipers are aimed at enthusiasts: they bolt directly in place of the stock calipers and look good behind stock or custom wheels.
The caliper and bracket are remanufactured in the Chicago, IL facility and finished in high-temperature red powder-coat. New premium boots and seals are fitted, and the caliper pins are lubricated with high-temperature silicone for long service life.
Key features
- Bolt-in replacement for the stock front calipers
- Caliper and bracket remanufactured in Power Stop’s Chicago, IL facility
- High-temperature red powder-coat
- New premium boots and seals
- Silicone-lubricated caliper pins
- Premium abutment clips included where applicable
Brake fluid and bleeding
A caliper replacement opens the hydraulic circuit, so air can enter the lines during the job. Keep the reservoir topped up, avoid letting it run dry, and bleed the caliper until the pedal feels firm before moving the vehicle. Use fresh fluid of the type the vehicle requires, and dispose of the old fluid properly rather than reusing it.
Because the caliper works with the pads and rotors, inspect those parts when the calipers are replaced. Worn pads or grooved rotors can cause uneven pressure and a pulling sensation. Slide pins should move freely, and boots should seat cleanly over the pins. Check for fluid seepage at every fitting after a short test drive, and recheck the pedal once the car has cooled.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTS6232 |
| Product type | Remanufactured brake calipers |
| Position | Front |
| Finish | High-temperature red powder-coat |
| Fit | Direct fit |
Vehicle fitment
It fits the 2009–2013 INFINITI FX50 and the 2014 INFINITI QX70, both in the Base trim, with the QX70 limited to its 2014 model year.
Confirm fit for your vehicle’s year, model and trim before ordering, since later QX70 model years need a separate check.
Installation notes
Replacing a caliper opens the hydraulic system, so bleed the brakes before driving.
What’s included
A front brake caliper with bracket, with abutment clips where applicable.
Not included: Brake pads, rotors and brake fluid to go with the calipers.









