Overview
The Baer Brakes 4262239S is a Pro Plus rear brake system kit for Ford 8.8 inch C-clip rear ends, with a 2.5 inch axle standoff and a five lug, 5×4.50 bolt pattern. It uses a 6-piston 6P caliper in silver on a 14 inch two-piece slotted and drilled rotor, plus a park brake shoe assembly, for rear axles that call for a larger brake package.
Rotors are pre-assembled with NAS high grade stainless hardware, and each rotor has a billet aluminum hat. Stainless braided hoses and hardware come with the kit. The 14 inch Pro Plus fits most 18 inch or larger wheels, but fit cannot be guaranteed across every wheel style, so use the Q082P template for checks.
Key features
- Silver 6P six-piston caliper with staggered pistons to reduce uneven pad wear
- Stainless steel pistons, abutments and noise suppression clips
- Two-piece slotted, drilled and zinc-plated rotor with billet aluminum hat
- Rotors pre-assembled with NAS high grade stainless hardware
- Dual seals against dust, weather and pressure
- Caliper manufactured in Phoenix, Arizona, CNC machined from US-sourced forged or billet aluminum
- Park brake shoe assembly in the backing plate; braided hoses, DOT approved
Larger rotor considerations
A larger rotor and a six-piston caliper add mass and heat capacity, which changes how the rear axle behaves under repeated braking. Wheel offset and backspacing matter more with a bigger rotor, because the hat and caliper need room without contacting the spokes or the inner barrel. Tire sidewall height and rolling diameter also affect how the brake package sits relative to the fender.
Heavier brake components put more load on the hub, bearings and lines, so these are worth inspecting during service. Staggered pistons help spread pad pressure, but uneven pad wear can still occur from sticking slides or a worn backing plate. Keep the rotor surface clean and check runout when it is removed, and make sure the stainless hardware is torqued to specification during reassembly.
- Confirm wheel offset clears the caliper
- Inspect hub bearings when the rotor is off
- Check rotor runout during reassembly
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262239S |
| UPC | 844165037392 |
| Sold as | Kit |
| Caliper | 6P, six-piston, floating |
| Caliper color | Silver |
| Rotor outside diameter | 14.0 inch |
| Rotor type | Two-piece, slotted, drilled, zinc plated, vented |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.15 |
| Pad type | D0731 (FMSI D0731) |
| Axle flange | Ford 8.8 inch |
| Axle standoff | 2.5 inch |
| Lug count | 5 lug, 5×4.50 bolt pattern |
| Minimum wheel diameter | 18.0 inch |
| Park brake | Included; park brake cables not included |
| Brake hose | Braided, DOT approved |
| Template | Q082P |
| Grade | Performance |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
It is built around the Ford 8.8 inch C-clip axle flange and a 2.5 inch axle standoff, so confirm the axle type on your vehicle first. The minimum wheel diameter is 18.0 inch, so check wheel size against the Q082P template.
Installation notes
Park brake cables are not included, so plan to obtain them separately. The rotors come pre-assembled with stainless hardware, so the hats do not need to be assembled on site. With a six-piston caliper and a parking brake, a qualified technician should install and bleed the system, check pad seating and confirm park brake operation before the vehicle is driven.
What’s included
The kit includes the 6P caliper, the 14 inch two-piece rotor with billet aluminum hat, the pre-assembled NAS stainless hardware, stainless braided hoses, the backing plate with park brake shoe assembly, and the 2.5 inch axle standoff.
Not included: park brake cables, lug nuts and a front rotor.















