Overview
The Baer Brakes Pro Plus 4262239R is a rear brake system for Ford 8.8 inch C-clip rear ends, with a 2.5 inch axle standoff and a 5 lug, 5×4.50 wheel bolt pattern. It combines a 14 inch, 2-piece slotted and drilled rotor with a red 6-piston caliper, built for owners upgrading rear braking on this axle.
Baer’s backing plate serves as the caliper mount and houses a one-piece park brake shoe assembly. Rotors come pre-assembled with NAS high grade stainless hardware, and stainless braided hoses are included. The kit is listed with Baer template Q082P for checking wheel clearance.
Key features
- 6-piston, 6P caliper in a 2-piece design, manufactured in Phoenix, Az
- CNC machined from US-sourced forged or billet aluminum
- Powder coated finish with stainless steel pistons, abutments and noise suppression clips
- Staggered pistons to minimize uneven pad wear
- Dual seals for dust, weather and pressure
- 2-piece slotted, drilled, zinc plated rotor with billet aluminum hat
- Stainless braided hoses, DOT approved
- Pro Plus rotor fits most 18 inch or larger wheels (minimum wheel diameter 18.0 inch)
Hardware and hub care
Stainless hardware resists corrosion better than plain steel, which matters on rear axles exposed to road salt, mud and water. Still, threads should be cleaned and checked before reuse, and any fastener with damaged threads or a rounded head should be replaced. Anti-seize compounds should be used only where the service information for the specific fastener calls for them, since they change the torque reading.
Pre-assembled rotors save time at installation, but the hub face and mating surfaces still need to be clean and free of rust before the rotor seats. Check the contact area for scoring or buildup, and confirm the rotor sits flat against the hub before tightening. Hoses should be inspected for chafing where they pass near the suspension, and replaced if the outer braiding shows wear.
- Clean hub faces before the rotor seats
- Replace fasteners with damaged threads
- Inspect hoses where they pass suspension parts
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262239R |
| UPC | 844165037361 |
| Sold as | Kit |
| Caliper | 6-piston, floating, red |
| Rotor outside diameter | 14.0 inch |
| Rotor type | 2-piece, vented, slotted and drilled |
| Rotor surface | Zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.15 |
| Axle flange | Ford 8.8 inch |
| Axle standoff | 2.5 inch |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.50 |
| Minimum wheel diameter | 18.0 inch |
| Pad FMSI number | D0731 |
| Hose material | Steel braided, DOT approved |
| Hardware | NAS high grade stainless |
| Fitment template | Q082P |
| Country of origin | US |
Vehicle fitment
The kit is made for Ford 8.8 inch C-clip rear ends with a 2.5 inch axle standoff and a 5×4.50 wheel bolt pattern.
Installation notes
Confirm the axle flange and bolt pattern match your housing before installation. The park brake cannot be finished until park brake cables are sourced, because cables are not included. Use template Q082P to compare clearance with your chosen wheel, since Baer cannot guarantee fit into every wheel style. Brake work is safety-critical, so have the system installed by a qualified technician.
What’s included
The kit includes the rear 6-piston caliper, 2-piece rotors pre-assembled with stainless hardware, the backing plate with its one-piece park brake shoe assembly, and stainless braided hoses with hardware.
Not included: front rotor, lug nuts, park brake cables.















