Overview
The Baer Brakes 4262177B pairs 13.0 inch rear rotors with black 6P six-piston calipers for rear axles that use Ford 8 inch or 9 inch small bearing housing ends and a 5×5.00 inch wheel bolt pattern. It is a full rear system, supplying rotors, calipers, a backing plate with the park brake shoe, hoses and hardware.
The backing plate is designed as a caliper mount that also holds the park brake shoe, which Baer describes as a modern one-piece assembly. The D0731 pad type is specified, and the rotors are two-piece slotted, drilled and zinc plated with a billet aluminum hat. No vehicle model is named, so use the axle and bolt pattern details to confirm the match.
Key features
- Black finished six-piston fixed calipers, CNC machined and powder coated
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons aimed at more even pad wear
- Two-piece slot, drill and zinc plated rotor with billet aluminum hat
- Dual seals for dust, weather and pressure in the described DOT-compliant design
- Pre-assembled NAS high grade stainless hardware and stainless braided hoses
Choosing a rear brake setup
A complete rear system ties rotors, calipers, backing plate and hoses together, so the parts are best replaced as a set rather than mixed with older components. Mixing a new caliper with a worn rotor, or a new rotor with an old pad, can lead to uneven wear and noise. When comparing kits, consider how the park brake is handled, since a parking shoe inside the plate changes how the cable system is serviced.
Black caliper finishes are mostly a visual choice, but powder coated surfaces can chip near the pad area during trail work. Inspect the finish after rough use and touch up exposed metal to slow corrosion. Keep the rubber dust boots and bleeder screws clean, since dirt in those spots is a common cause of sticking pistons and a sluggish pedal.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262177B |
| UPC | 844165036760 |
| Caliper type | 6P six-piston fixed caliper |
| Caliper color | Black |
| Caliper piston quantity | 6 |
| Rotor outside diameter | 13.0 inch |
| Rotor type | 2-piece slotted, drilled, zinc plated |
| Rotor construction | Vented |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.1 |
| Minimum wheel diameter | 17.0 inch |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×5.00 inch |
| Axle flange | Ford 8 inch/9 inch small bearing |
| Pad type (FMSI) | D0731 |
| Hose material | Steel braided, DOT approved |
| Park brake | Includes park brake shoe assembly; park brake cables not included |
| Template | Q082H |
| Grade type | Performance |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
No vehicle is named for this kit. It is intended for Ford 8 inch and 9 inch rear axles with small bearing housing ends and a 5×5.00 inch bolt pattern. Baer’s Q082H template is the reference for checking wheel fit against the rotor and caliper.
Rear axles with other flange types or bolt patterns fall outside this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Start by test fitting the rotor and wheel with the Q082H template. Park brake cables are not supplied, so plan to source them. After mounting, bleed the hydraulic lines and test the brakes at low speed before driving, since the pedal feel should be checked before road use.
What’s included
The package covers the black calipers, 13.0 inch rotors, the park brake backing plate assembly, stainless braided hoses and pre-assembled hardware.
Not included: lug nuts, park brake cables, and the front rotor.















