Overview
The ARB Shackle and Pin Kit, part number OMEGS4, is a greasable shackle and pin kit for the 1984–1985 Toyota 4Runner in the DLX and SR5 trims. It is a direct fit for those models.
The kit is built around a bolt-together assembly, which ARB says eliminates shackle pins sitting out of angle against the side plates. Each shackle pin has two grease outlet holes to give the pin full grease coverage.
Key features
- Greasable shackle and pin design
- Bolt-together assembly
- Two grease outlet holes in each pin
- Direct-fit design
Choosing a shackle kit
A shackle kit sits at the end of the leaf spring and carries the spring’s movement, so the pin, plates and bushings all take wear. Choosing a kit means matching the pin to the existing spring eye and making sure the plates fit the frame hanger without binding.
Bolt-together designs are often picked for their simpler fitting, but the pin still needs to sit square against the side plate. Pair the kit with new bushings and check the rear spring hangers for cracks when the old shackle comes off.
Grease the pin on a regular schedule, and recheck the bolts after the first few trail runs. Replace the shackle when the pin hole is elongated, the plates are cracked or the pin will not hold grease.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | OMEGS4 |
| Kit type | Shackle and pin kit |
| Lubrication | Greasable, two outlets per pin |
Vehicle fitment
It fits the 1984–1985 Toyota 4Runner in the DLX and SR5 trims.
Other 4Runner years, including 1986 and later, and other Toyota models are not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Assemble the shackle so the pin sits square against the side plate, then grease both outlet holes before use.







