Overview
The ARB OMEGS7 is a greaseable shackle and pin kit from ARB 4×4 Accessories for leaf spring suspension. Its bolt-together assembly is designed to eliminate out-of-angle problems between the shackle pin and side plate.
Fitment is universal, so no year, make, model or trim is tied to this kit.
Key features
- Bolt-together shackle assembly
- Each shackle pin has two grease outlet holes
- Built to avoid out-of-angle shackle pin to side plate issues
- ARB part number OMEGS7 with UPC 881348006028
Greasing and inspection routine
Shackles are the pivot points that let a leaf spring change length as the axle moves, so they carry steady load and pick up dirt, water and grit. A greaseable pin helps flush those contaminants out and keeps the pin surface protected. Regular greasing matters most after water crossings, mud runs and long stretches on washboard roads.
A bolt-together assembly is easy to service, but it needs a fresh look after each season of use. Check fastener torque with a torque wrench when the kit is first installed and again after the first few drives. Inspect the pin surface for wear grooves, and replace the pin or bushing if play develops at the shackle.
- Grease both outlets until fresh grease shows
- Inspect pins for grooves and galling
- Check the shackle for play at the spring end
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | OMEGS7 |
| UPC | 881348006028 |
| Component | Greaseable shackle and pin kit |
| Grease outlet holes | Two per shackle pin |
| Assembly | Bolt together |
| Fitment | Universal fit |
Vehicle fitment
No vehicle is named for OMEGS7, so the kit is not confirmed for any specific truck or SUV. Shackles are set to a particular leaf spring and frame, so the application needs checking.
The universal fit label does not confirm a match with your spring pocket or frame hangers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is a bolt-together assembly. Grease through both outlet holes after assembly so each pin receives grease from both outlets. Support the axle and spring securely before removing the old shackles.
What’s included
The kit is a shackle and pin set. Check the individual bolts, bushings and sleeves against your installation before starting work.






