Overview
The ARB Shackle And Pin Kit, part number OMEGS3, is a rear greasable shackle and pin kit for the 1986–1990 Toyota 4Runner in the DLX and SR5 trims. Leaf spring shackles connect the ends of the spring to the frame and let the spring change length as the axle moves, so the pins are a wear point.
The kit uses a bolt-together assembly designed to avoid out-of-angle shackle pin contact with the side plate. Each pin has two grease outlet holes for fuller lubrication.
Key features
- Greaseable shackle pins
- Two grease outlet holes in each pin
- Bolt-together assembly
- Designed to avoid out-of-angle pin to side plate problems
- Rear position
Greasing and pin wear
Leaf spring shackles pivot at each end of the spring and carry the load as the axle moves up and down. The pin and its bushing are the parts that wear first, because they work under constant movement and often pick up grit. A pin that is kept greased moves more smoothly and puts less stress on the shackle plate, which helps the joint last longer on trail and on pavement.
Grease the pins at regular intervals, and after water crossings, mud or long dusty runs. Pump grease until it shows at the outlet holes so old grease and debris are pushed out. Before each greasing, check the pins for play, cracks around the plate, and grease that has turned dark or gritty. When shackles are replaced, it is common to renew the bushings and hardware at the same time.
- Look for side-to-side play at the pin
- Check the side plate for cracks or bends
- Replace bushings showing heavy wear
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | OMEGS3 |
| UPC | 881348006004 |
| Product type | Leaf spring shackle and pin kit |
| Position | Rear |
| Lubrication | Greasable, two grease outlet holes per pin |
| Assembly | Bolt-together |
Vehicle fitment
It fits the 1986–1990 Toyota 4Runner in the DLX and SR5 trims.
Coverage is limited to the 1986–1990 4Runner, so later 4Runner generations and other Toyota models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is bolt-together, and the two grease outlet holes in each pin are the lubrication points once it is assembled. Support the vehicle securely on jack stands before working on the rear suspension.
What’s included
Check the shackles, pins and hardware in your set against your installation before starting work.




