Overview
The ARB OMESB8 is a greaseable shackle and pin kit from ARB 4×4 Accessories, part number OMESB8. Its bolt-together build is designed to avoid out-of-angle pin alignment at the side plate.
Key features
- Greaseable shackle and pin design
- Bolt-together assembly
- Two grease outlet holes on every pin
- Direct fit designation for part number OMEGS8
Choosing a shackle setup
Shackles connect the leaf spring to the frame and let the spring length change as the axle travels, so they take repeated loads through the pin and bushing. When choosing a replacement kit, fit at the spring eye and the frame hanger matters more than any product name. Match the pin diameter, bolt pattern and side plate geometry to your existing hardware.
Shackle kits are often replaced together with bushings and grease fittings because they wear as a set. Bolt-together assemblies are easier to service than welded units, since a worn pin can be replaced without cutting. Check the side plate for elongated holes or cracks, and tighten all fasteners after the first few trail runs.
- Measure the pin diameter before ordering
- Replace worn bushings along with the shackle
- Inspect the frame hanger for cracks
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | OMEGS8 |
| UPC | 881348006035 |
| Grease outlets | Two per shackle pin |
| Kit type | Shackle and pin |
| Fit type | Direct fit |
Vehicle fitment
OMESB8 is a direct fit designation, but no year, make, model or trim is tied to it. Compare it with your existing shackles before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is a shackle and pin set. Check the individual components against your installation before starting work.




