Overview
The Warrior 110 is a leaf spring shackle kit, part number 110, for the 1960–1984 Toyota Land Cruiser (Base). The shackles are MIG-welded and jig-built, and each kit includes the mounting hardware needed for installation.
Each kit lifts one end of the vehicle from 1/2 inch up to 2-1/2 inch, depending on the application. Kits are sold in pairs and come in hammertone gray or gold zinc finishes.
Key features
- MIG-welded, jig-built construction
- Lift of 1/2 inch to 2-1/2 inch at one end, depending on application
- Mounting hardware included for an easy installation
- Hammertone gray or gold zinc finish
- Sold in pairs
Before you install
Leaf spring shackle kits change how the spring hangs and how the body sits over the axle, so the first step is to measure ride height on both sides before starting. Note the current height at each corner, then compare it after installation. Uneven readings usually point to a shackle that is not seated properly or a spring that has taken a set.
MIG-welded shackles are only as good as their welds and mounting points. Look over the welds for cracks, check that the mounting holes are clean and not elongated, and confirm the spring eyes are not worn. Replace old pivot bolts with the hardware in the kit rather than reusing them. After the first few drives, recheck all fasteners and listen for shifting or clicking at the shackle.
Specifications
| Brand | Warrior |
|---|---|
| Part number | 110 |
| UPC | 63414601100 |
| Construction | MIG-welded, jig-built |
| Lift | 1/2 inch to 2-1/2 inch, depending on application |
| Finish | Hammertone gray or gold zinc |
| Quantity | Pair |
Vehicle fitment
The manufacturer fitment list names the 1960–1984 Toyota Land Cruiser (Base).
Other Land Cruiser years and Toyota Pickup models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes the mounting hardware needed for installation. Once the shackles are in place, check the lift at the shackled end against the 1/2 inch to 2-1/2 inch range.
Place the vehicle on stands before working beneath it.
What’s included
A pair of shackles with the mounting hardware needed for installation.









