Overview
The ARB Shackle and Pin Kit OMEGS19 is a rear shackle and pin kit for the Toyota Land Cruiser (Base) in the 1984–2011 and 2013–2014 model years. It is a greasable, bolt-together assembly designed to keep the shackle pin square to the side plate.
Each shackle pin has two grease outlet holes, which ARB says guarantee maximum grease coverage across the pin. The kit is sold under the ARB 4×4 Accessories brand as part of its suspension range.
Key features
- Bolt-together assembly intended to eliminate out-of-angle shackle pin to side plate problems
- Two grease outlet holes in each shackle pin for maximum grease coverage
- Greasable design for the rear shackle position
- Direct fit to the Land Cruiser Base models in the manufacturer fitment list
Shackle wear and greasing
Shackles and pins take constant side load as the leaf spring flexes, so wear shows first at the pin bore and the side plate. Looseness, clicking on articulation and grease that leaves quickly are common signs that the pin or bushing is wearing. Replace worn pins before the shackle plate is damaged.
Regular greasing keeps the pin moving freely and washes out grit. Grease after washing the vehicle or after a water crossing, and use the outlet holes to push fresh grease through the pin. Check the fasteners on the shackle each time the kit is serviced, and keep the rear axle supported while working, since the spring can shift when a shackle is loosened.
- Looseness or clunking when the axle articulates
- Grease that does not flow through the pin
- Cracks or elongated holes in the side plate
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | OMEGS19 |
| UPC | 70000513348 |
| Position | Rear |
| Type | Shackle and pin kit |
| Lubrication | Greasable, two grease outlet holes per pin |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the Toyota Land Cruiser (Base) for 1984 through 2011, and again for 2013 and 2014. The list has a gap between 2011 and 2013.
Land Cruiser trims beyond the Base entry are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit uses a bolt-together assembly, so check that the pin and side plate sit square before the final torque. Grease each pin through its two outlet holes once the kit is assembled. Support the rear axle securely before working on the shackles.
What’s included
The kit is a rear shackle and pin set. Check that every part is on hand before the kit goes on.



